634643
8
Zoom out
Zoom in
Vorherige Seite
1/96
Nächste Seite
6
EN
Switch on
1
Put the plug of the air purier into
the power outlet.
» All lights go on twice and you
hear a beep. Then, the lights go
out again.
2 Press the
button to switch on the
purier (g i).
» The air quality light shows the
current air quality.
» The fan speed
light goes on
(g j).
3 Press the
button to switch o the
purier.
Set the sensitivity of the
air quality sensor
People with certain health problems
(for example: allergies or asthma) have
a greater need for healthy air. For this
reason, the purier allows you to adjust
the sensitivity of the air quality sensor. If
you set it to higher sensitivity level, the
purier starts cleaning the air at lower
pollution level.
There are 3 sensitivity levels:
Extra sensitive (default setting)
Sensitive
Standard
You can adjust the sensitivity of the air
quality sensor in the following way.
Note
When it is set to a higher sensitivity,
the purier starts cleaning the air at
lower pollution levels to make the air
even cleaner. Plug the purier before
adjusting the sensitivity of the air
quality sensor.
4 Use the air
purifier
Understand the air
quality light
Color of the air
quality light ring
Air quality level
Blue Good
Purple Fair
Red Bad
The air quality light automatically goes
on when the purier is switched on.
Note
The built-in air quality sensor measures
the air quality and automatically selects
the appropriate color of the air quality
light. When the air is clean, the color
of the air quality light is in blue. When
the air quality deteriorates, the color of
the air quality light changes to purple
or red.
Understand the healthy
air protect alert
The lter replacement light ( )
indicates the lters have to be replaced
(g h).
Healthy air protect alert Follow this
Filter replacement light
is on continuously.
This lasts approximately
for 2 weeks. On the last
day of 2 weeks, the
purier beeps every 30
minutes to inform you
that the lters need to
be replaced.
Replace the
NanoProtect
Activated
Carbon lter
and the
NanoProtect
lter.
8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Philips AC4012 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info