Bedienungsanleitung Philips AD7000W (Seite 26 von 28) (Englisch)

474071

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

•If your Wi-Fi router is Wi-Fi 802.11n

certied, make sure to enable the

802.11b/g mode. AD7000W does not

support connection to routers with

802.11n only.

•This device does not support the WPS-

PIN method.

•If your Wi-Fi router supports WPS and the

WPS-PBC method but fails to connect to

AD7000W, try the manual Wi-Fi setup

method (see ‘Scenario 2: Connect to a

non-WPS router’ on page 14).

•Enable SSID broadcast on the Wi-Fi router.

•Keep away from potential sources of

interference which may affect Wi-Fi signal,

such as microwave ovens.

•If you fail to use your PC for Wi-Fi network

setup, check whether your PC is using a

Wi-Fi network. You cannot use Ethernet

connection for AirPlay network setup.

•Make sure that the SSID name of your

home router consists of alphanumeric

characters, with no space or special

characters like %/#/* inserted.

•If you choose to rename the AirPlay device

‘Philips_Fidelio XXXX’ in the setting

menu, do not use special characters or

symbols.

•For some new types of Wi-Fi routers, a

network name (SSID) may be created

automatically when you use WPS for

connection. Always change the default

network name (SSID) to a simple one that

consists of alphanumerical characters, and

also change the Wi-Fi security mode to

secure your network.

Occasional breaking of AirPlay music

streaming

Do one or all of the following:

•Move AD7000W closer to your Wi-Fi

router.

•Remove any obstacles between AD7000W

and your Wi-Fi router.

•Avoid using Wi-Fi channel which is

overlapped by the nearby Wi-Fi network.

8 Troubleshooting

Warning

•Never remove the casing of this apparatus.

To keep the warranty valid, never try to repair

the system yourself.

If you encounter problems when using this

apparatus, check the following points before

requesting service. If the problem remains

unsolved, go to the Philips web site (www.

philips.com/welcome). When you contact

Philips, ensure that the apparatus is nearby

and the model number and serial number are

available.

No power

•Make sure that the AC power plug of the

device is connected properly.

•Make sure that there is power at the AC

outlet.

No sound

•Adjust the volume.

•Check the Wi-Fi network connection.

Set up the network again if needed (see

‘Connect to your home Wi-Fi network for

AirPlay’ on page 13).

No response from the unit

•Press and hold on AD7000W for more

than 5 seconds to reset the device. Then

set up the Wi-Fi network for AD7000W

again (see ‘Connect to your home Wi-Fi

network for AirPlay’ on page 13).

•Disconnect and reconnect the AC power

plug, and then switch on the device again.

Wi-Fi network connection failed

•Check if your Wi-Fi router is Wi-Fi

802.11b/g certied. This device is only

compatible with Wi-Fi 802.11b/g certied

routers.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips AD7000W Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips AD7000W

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info