Bedienungsanleitung Philips AJ3380 (Seite 6 von 49) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Finnisch)

461645

Zoom out

Zoom in

Vorherige Seite

1/49

Nächste Seite

Switching off the alarm completely

• Before or during the set alarm goes off, push

the ALARM (1 or 2)

switch to the OFF position.

– The alarm indicator will disappear from the

display.

The clock radio has a built-in timer device called

the SLUMBER, which enables the radio to be

automatically switched off after a set period of

time; this allows you to lie back, listen and fall

asleep. The maximum slumber time is 59

minutes.

1. Set the RADIO switch to the OFF position.

2. Set your slumber time by pressing on the

SLUMBER button. Keep your finger on the

button and the display will begin to count

down from 59 to 00 minutes.

3. Release the button as soon as the required

slumber time is reached.

You can switch off the radio before the slumber

time has elapsed:

– To cancel the SLUMBER function, press

SLUMBER OFF/REPEAT ALARM.

Notes:

– The slumber function does not affect the

alarm setting (s).

– If during SLUMBER you have turned down the

volume and you have an alarm set in radio

mode, make sure you have adjusted the

volume loud enough to wake you up the next

day.

– If you do not intend to use the clock radio for

a long time, disconnect the set by removing

the plug from the wall socket. The battery

should also be removed to prevent chemical

leakage which will damage your set.

– To clean your set from fingerprints, dust and

dirt, use a clean and soft damp cloth or

chamois leather. Do not use cleaning products

which contain benzene, thinner etc. as these

may harm the housing.

– When a power failure occurs, the complete

clock radio will be switched off.

– As soon as the power supply returns, the

numbers on the display will start to flash. This

indicates that you must set the correct time on

the clock.

– To retain the clock time and the set alarm time

(s) in the event of a power failure or

disconnection, insert a 9 volt battery, type

6F22 (not supplied) into the battery

compartment: this will act as a power back

up. However, the time will not be illuminated

on the clock display. Operation of the alarm (s)

and radio are also excluded.

For clarity, the battery back up is used to

retain the set clock and alarm time (s) only.

As soon as the power supply returns, the

display will indicate the correct time.

• Before inserting the battery, connect the

power plug to the wall outlet.

• Insert a battery into the battery compartment.

– Replace the battery once a year. It is not

possible to say precisely how long the battery

will last. The service life depends on how

often and for how long the power supply fails.

This varies according to country and region.

POWER BREAKDOWN BACKUP

MAINTENANCE

SLUMBER OFF

SLUMBER ON

SLUMBER

ALARM/SLUMBERING ADDITIONAL INFORMATION

English

XP AJ 3380/00.3 22-06-2000 12:14 Pagina 6

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips AJ3380 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info