Bedienungsanleitung Philips-Avent SCD498 (Seite 10 von 132) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

507147

Zoom out

Zoom in

Vorherige Seite

1/132

Nächste Seite

2 Briey press the volume + and – buttons on the parent unit until the desired microphone

sensitivity level for the baby unit has been reached.

Note: If you press the SENSITIVITY button and/or the volume + and – buttons too long, the microphone

sensitivity is not adjusted.

one light on = minimum sensitivity level

all lights on = maximum sensitivity level

Note: When the microphone sensitivity of the baby unit is set to a high level, it picks up more sounds and

therefore transmits more often. As a result, the units consume more power.

Talk function

You can use the TALK button on the parent unit to talk to your baby (e.g. to comfort your baby).

1 Press and hold the TALK button and talk clearly into the microphone (Fig. 19).

2 Release the TALK button when you have nished talking.

Note: When you press the TALK button, you can no longer hear your baby.

Silent baby monitoring

1 Briey press the volume down (–) button on the parent unit until the volume is switched off

completely (Fig. 20).

The volume is completely switched off when all sound level lights are out.

As long as the baby unit does not detect a sound, all sound level lights on the parent unit are

out (Fig. 21).

When the baby unit picks up a sound, one or more sound level lights on the parent unit

come on. The louder the sound, the more lights come on.

Nightlight

1 Briey press the nightlight button Q on the baby unit to switch on the nightlight. (Fig. 22)

2 Press the nightlight button Q again briey to switch off the nightlight.

The nightlight dims gradually before it goes out completely.

Note: If you press the nightlight button Q too long, the nightlight does not come on or go out.

Tip: Switch off the nightlight when you operate the baby unit on batteries. This saves power.

Paging the parent unit

If you have misplaced the parent unit and its volume is switched off, you can use the PAGE button

on the baby unit to locate the parent unit.

1 Briey press the PAGE button on the baby unit (Fig. 23).

The parent unit automatically resets to medium volume level and produces a paging alert

tone.

2 To stop the paging alert tone, press the PAGE button again briey or press any button on the

parent unit.

Note: If you press the PAGE button too long, the parent unit does not produce the paging alert tone.

Belt clip and neck strap

If the batteries of the parent unit are sufciently charged, you can take the unit with you inside and

outside the house if you attach the unit to your belt or waistband with the belt clip or if you hang it

round your neck with the neck strap. This allows you to monitor your baby while you are moving

around.

ENGLISH10

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips-Avent SCD498 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info