Bedienungsanleitung Philips-Avent SCD535 (Seite 10 von 216) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

507143

Zoom out

Zoom in

Vorherige Seite

1/216

Nächste Seite

E Tip:

Switch off the nightlight when you operate the

baby unit on non-rechargeable batteries. This saves

power.

6.5 Paging the parent unit

If you have misplaced the parent unit, you can use

the PAGE button on the baby unit to locate the

parent unit.

Note:

The paging function only works when the parent

unit is switched on.

1 Press the PAGE button on the baby

unit (Fig. 27).

• The message ‘Paging’ and the paging symbol

appear on the displays of the baby unit

and parent unit.

• The parent unit produces a paging alert

tone.

2 To stop the paging alert tone, press the PAGE

button again or press any button on the

parent unit.

6.6 Lullaby function

D Note:

You can also operate the lullaby function in the

menu of the parent unit (see chapter ‘Menu

options’, section ‘Lullaby function’).

1 Press the play/stop button Eon the

baby unit to play the currently selected

lullaby. (Fig. 28)

2 To select another lullaby, press the lullaby

button Kon the baby unit within 2 seconds to

toggle through the list of lullabies. (Fig. 29)

Note:

If you do not press the lullaby button Kfor

more than 2 seconds, the lullaby shown on

the display starts to play.

• The number of the lullaby appears on the

display together with the lullaby symbol K.

• The selected lullaby is repeated 5 times in

a row.

• When you select ‘play all’, all 5 lullabies are

played once.

D Note:

If the volume is set to a high level, the units

consume more power.

6.2 Talk function

You can use the TALK button on the parent unit

to talk to your baby (e.g. to comfort your baby).

1 Press and hold the TALK button and talk

clearly into the microphone from a distance of

15-30cm (Fig. 25).

• The green LINK light starts ashing and the

message ‘Talk’ appears on the display.

2 Release the TALK button when you have



6.3 Sound level lights

The parent unit continuously monitors the sound

level in your baby´s room and the sound level

lights let you know if there is any activity. If your

baby cries, you see the sound level lights light up

on the parent unit.

• As long as the baby unit does not detect a

sound, all sound level lights on the parent unit

are out.

• When the baby unit picks up a sound, one or

more sound level lights on the parent unit go

on. The number of lights that go on is related

to the loudness of the sound picked up by the

baby unit.

6.4 Nightlight

D Note:

You can also switch the nightlight on and off in

the menu of the parent unit (see chapter ‘Menu

options’, section ‘Nightlight’).

1 Press the nightlight button Qon the baby unit

to switch on the nightlight. (Fig. 26)

• Q appears on the display of the parent unit.

2 Press the nightlight button Qagain to switch

off the nightlight.

• The nightlight dims gradually before it goes

out completely.

• Qdisappears from the display of the parent

unit.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips-Avent SCD535 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info