Bedienungsanleitung Philips-Avent SCF271 (Seite 4 von 17) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

507408

Zoom out

Zoom in

Vorherige Seite

1/17

Nächste Seite

Philips AVENT Express II Microwave Steam Steriliser

GB GB

Loading the steriliser

Assembly and Use

Before using the Express II Microwave Steam Steriliser,

always ensure that the items are positioned according

to the below loading instructions.

Loading six 125ml/4oz or 260ml/9oz

AVENT Airflex Feeding Bottles

1. Position the teats in the teat cavities around

the dome cap stem.

2. Place the screw rings over the teats.

3. Place the first three dome caps in the lower slots

of the dome cap stem.

4. Place the remaining three dome caps in the upper

slots of the dome cap stem.

5. Position the bottles upside down around the

previously loaded teats and screw rings.

Loading three 330ml Airflex Feeding Bottles

1. Position the teats in the three teat cavities

surrounding the dome cap stem.

2. Place the screw rings over the teats.

3. Position the bottles upside down in the three

outer teat cavities.

4. Arrange the three dome caps around the edge

of the rack in between the inverted bottles.

Loading one or two Philips AVENT ISIS Breast

Pumps (non-electrical components only) and

two 125ml/4oz OR two 260ml/9oz Airflex

Feeding Bottles

1. Disassemble the ISIS Breast Pump ensuring

the stem is removed from the diaphragm.

2. Position the ISIS Breast Pump bodies into the

two slots provided.

3. Position the teats in the teat cavities around

the dome cap stem.

4. Place the screw rings over the teats.

5. Place one dome cap in the unobstructed lower

slot of the dome cap stem, then the second in

the upper slot on top of the inserted dome cap.

6. Position the bottles upside down in the

unobstructed bottle cavities.

Place the remaining NON-ELECTRICAL pump

components in any unobstructed space on the rack.

Loading six 180ml/6oz OR 240ml/8oz

AVENT VIA Cups and Lids

1. Position the VIA Cups upside down around

the dome cap stem.

2. Position the VIA Lids vertically around the racks

edge. Rims should face out for easier loading.

Loading one VIA Feeding System* and up to

four 180ml/6oz OR 240ml/8oz VIA Cups and Lids

1. Position the teat in an outer teat cavity.

2. Place the screw ring over the teat.

3. Position the VIA Cups upside down around

the dome cap stem.

4. Place the VIA Adaptor on its side around the

racks edge (as shown).

5. Position the VIA Lids vertically around the racks

edge. Rims should face out for easier loading.

6. Place the dome cap in the unobstructed upper

slot of the dome cap stem.

Loading other feeding and baby product items

When sterilising other NON-ELECTRICAL PRODUCTS simply

place the components in the rack allowing enough

space so that steam can effectively circulate.

* Consists of VIA Cup, Lid and Adaptor, an Extra Soft Slow

Flow teat, dome cap & screw ring.

Contents

1. Lid

a. Clips

2. Bottle/Accessories Rack

b. Dome cap stem

c. Bottle cavity

d. Teat cavity

e. ISIS Breast Pump slots

3. Base

f. Safety grips

Before each use

Wash all items in warm

soapy water and then

rinse in water.

1. Remove rack from the

steriliser and pour

200ml of water

into the base.

IMPORTANT: Failure to add

enough water may cause

damage to the Express II

Microwave Steam Steriliser

and/or your microwave. Adding

too much water may mean your

items are not properly sterilised.

2. Put the rack back into

the base.

3. Position the lid over the

steriliser base and lock the

clips into place until you

hear them

“

click”.

4. Ensure that the microwave

is clean and dry before use –

Place the steriliser into the

centre of the microwave.

Select microwave wattage

and timings – See Table III –

do not exceed these times.

After each cycle

IMPORTANT: Allow the unit to cool for at least

two minutes before removing the steriliser from

the microwave.

1. Removing the steriliser from the microwave: After

the unit has cooled, remove it from the microwave

by holding the skirt and/or safety grips and then

place on an even, heat resistant surface.

NB: Items will remain sterile in the Express II Microwave Steam

Steriliser for up to 24 hours providing the lid is not removed.

2. After removing the steriliser from the microwave:

Remove the lid by unlocking the clips – When

removing the lid, point it away from you to allow

steam to escape.

Care and cleaning

• Always drain the excess water from the unit

and rinse to prevent the build up of limescale.

• Always store when completely dry.

• The Express II Microwave Steam Steriliser

is dishwasher safe.

WARNINGS – FAILURE TO FOLLOW INSTRUCTIONS MAY

CAUSE SCALDING OR DAMAGE TO THIS PRODUCT

AND/OR YOUR MICROWAVE

• Wash your hands before handling your

sterilised products.

• Always ensure you use 200ml of water before

sterilising. (The unit should be emptied of residual

water before each subsequent use.)

• Always follow loading instructions and do

not overload.

• Do not use bleach or chemical sterilising solutions

/tablets in steriliser or on products to be sterilised.

• Do not sterilise metallic or electronic items

in the steriliser.

• Always use the appropriate heating time for the

power of your microwave unit. (see Table )

• In combination ovens, ensure grill is switched off

and has cooled before use.

• Be sure that the lid is properly fastened to

the base before placing in microwave.

• Always allow at least 2 minutes cooling time

before removing from the microwave.

• Do not remove the lid from the steriliser

immediately after cycle. Allow to cool as the steam

will be hot.

• When removing from microwave, be sure to hold

the steriliser level to avoid leaking or spilling of

hot water.

• When taking the steriliser out of the microwave,

TAKE CARE – it will still be hot.

• When removing the lid, point it away from you to

allow steam to escape.

• Take care when handling the sterilised products as

they may be hot.

• Do not rinse the bottles when you remove them

from the steriliser.

• Always keep out of reach of children.

• Do not microwave bottle brush.

NB: Do not overload the steriliser.

NB: Do not place dome caps in the steriliser upside down.

NB: The Express II Microwave Steam Steriliser is

designed to specifically hold the wide shape of

Airflex Feeding Bottles.

Some products featured may not be available

in all countries. Please contact Philips AVENT

to check availability.

III

Philips AVENT is here to help

GB: Call FREE on 0800 289 064

IRL: Call FREE on 1800 509 021

AU: 1 300 364 474

AVENT, Suffolk, CO10 7QS, England

www.philips.com/AVENT

I IV

Thank you for

choosing Philips AVENT

Now you can enjoy the convenience

and ease of using the Philips AVENT

Express II Microwave Steam Steriliser,

which effectively eliminates harmful

bacteria in just minutes! Its large

capacity holds more than any other

microwave steriliser – up to six

bottles – yet it is compact and

lightweight enough for travel.

Advanced features such as cool

safety grips aid in safe handling,

and make it easier than ever to

sterilise Philips AVENT Breast

Pumps, Bottles, Cups and more.

Please take a few minutes to read through

the ENTIRE INSTRUCTION LEAFLET including

the warnings before

using your Express II

Microwave Steam Steriliser

for the first time.

PLEASE RETAIN THESE INSTRUCTIONS. Also

available at www.philips.com/AVENT

III

9252-Micro(GB-EU)txt.qxd 20/8/07 16:24 Page 8

Philips-Avent SCF271 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info