Bedienungsanleitung Philips-Avent SCF285 (Seite 10 von 88) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

507404

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

1 Pour 80ml/2.7oz of white vinegar (5% acetic acid) and 20ml/0.7oz of water into the water

reservoir.

2 Leave the solution in the water reservoir until the scale has resolved.

3 Empty the water reservoir, thoroughly rinse it and wipe the base with a damp cloth.

Environment

- Do not throw away the appliance with the normal household waste at the end of its life, but

hand it in at an official collection point for recycling. By doing this, you help to preserve the

environment (Fig. 12).

Guarantee and service

If you need service or information or if you have a problem, please visit the Philips website at

www.philips.com or contact the Philips Consumer Care Centre in your country. You find its phone

number in the worldwide guarantee leaflet. If there is no Consumer Care Centre in your country,

go to your local Philips dealer.

Frequently asked questions

This chapter lists the questions most frequently asked about the appliance. If you cannot find the

answer to your question, contact the Consumer Care Centre in your country.

Question Answer

Why does water flow out of

the steriliser?

You may have poured too much water into the steriliser. Do

not pour more than 100ml water in the water reservoir.

Why are there white spots in

the water reservoir, the baskets

or the lid?

Scale build-up is normal and occurs more quickly in hard water

areas. Descale the appliance regularly (see chapter ‘Descaling’).

Why does a lot of steam

escape from under the lid?

Check if the lid has been placed on the basket properly.

Why does the sterilisation

process take so long?

You may have poured too much water into the steriliser (see

chapter ‘Using the appliance’). The number of items placed in

the baskets and the number of baskets used determine the

actual sterilisation time.

Why is the sterilisation process

so short?

You may have poured too little water into the steriliser (see

chapter ‘Using the appliance’).

Why does the appliance start

to heat up immediately when I

plug it in?

You have pressed the power-on button before you plugged in

the appliance. When you press the power-on button before

you put the plug in the wall socket, the steriliser starts

operating immediately when you plug it in.

SCF285/SCF284: Why can’t I

restart the appliance.

The appliance does not work for 10 minutes after a sterilising

cycle, it needs to cool down first. Wait for 10 minutes, before

you switch on the appliance again.

SCF287/SCF286: Why doesn’t

the ready light go out, when I

restart the appliance?

The appliance does not work for 10 minutes after a sterilising

cycle, it needs to cool down first. Wait for 10 minutes, before

you switch on the appliance again.

ENGLISH10

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips-Avent SCF285 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info