Bedienungsanleitung Philips-Avent SCF332 (Seite 11 von 112) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

507113

Zoom out

Zoom in

Vorherige Seite

1/112

Nächste Seite

2 Heat the bottle or storage cup with defrosted or refrigerated breast milk in a bowl of hot water

or in a bottle warmer.

3 Remove the screw ring and sealing disc from the bottle or remove the lid from the storage cup.

4 If you are using a storage cup, screw the adapter ring onto the cup.

5 Screw a sterilised screw ring with sterilised teat onto the bottle or onto the storage cup with

adapter ring.

Do’s

- Always check the temperature of the milk before you feed it to your baby.

- Always discard any breast milk that is left over at the end of a feed.

Don’ts

- Never heat breast milk in a microwave, as this can cause uneven heating, which can lead to hot

spots in the milk. It may also destroy nutrients in the milk.

Cleaning and sterilising

The motor unit, the silicone tube and cap and the adapter do not require cleaning and sterilising, as

they do not come into contact with breast milk.

Clean and sterilise all other parts of the breast pump before rst use. Also clean these parts after

each subsequent use and sterilise them before each subsequent use.

Danger: Never put the motor unit or the adapter in water or in a steriliser.

1 Disassemble the breast pump completely. Also remove the white valve.

Be careful when you remove the white valve and when you clean it. If it gets damaged, your

breast pump does not function properly. To remove the white valve, gently pull at the ribbed tab

on the side of the valve.

2 Cleanallparts,exceptthemotorunit,thesiliconetubeandcapandtheadapter,inthe

dishwasher (on the top rack only) or in hot water with some mild washing-up liquid and then

rinse them thoroughly.

Tocleanthevalve,rubitgentlybetweenyourngersinwarmwaterwithsomewashing-up

liquid. Do not insert objects into the valve, as this may cause damage.

3 Sterilise the cleaned parts of the breast pump in a Philips AVENT steam steriliser or by

boiling them for 5 minutes.

Never put the motor unit or the adapter in water or a steriliser. If necessary, you can wipe the

motor unit with a soft, damp cloth.

Storage

Keep the breast pump out of direct sunlight as prolonged exposure may cause discolouration.

1 Store the breast pump and its accessories in a safe and dry place.

Compatibility

The Philips AVENT electric breast pump is compatible with Philips AVENT bottles in our range.

When you use Classic bottles that feature our two-piece anti-colic system, always insert the ring in

the top of the bottle before you attach it to the breast pump. When you use other Philips AVENT

ENGLISH 11

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips-Avent SCF332 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info