Bedienungsanleitung Philips B5 Fidelio (Seite 8 von 20) (Englisch)

561697

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

a AUDIO-IN

Audio input from, for example, an MP3 player

(3.5mm jack).

b AUX-AUDIO IN L/R

Connect to an analog audio output on the TV

or an analog device.

c DIGITAL IN-COAXIAL

Connect to a coaxial audio output on the TV or

a digital device.

d (SERVICE)

ConnectaUSBashdrivetoupgradesoftware

of this product (not for media play).

e DIGITAL IN-OPTICAL

Connect to an optical audio output on the TV

or a digital device.

f HDMI IN1 / HDMI IN2

Connect to the HDMI output on a digital device.

g TO TV-HDMI OUT (ARC)

Connect to the HDMI (ARC) input on the TV.

h AC MAINS~

Connect to the power supply.

3 Connect and set up

This section helps you connect your SoundBar to a

TV and other devices, and then set it up.

For information about the basic connections of your

SoundBar and accessories, see the quick start guide.

Note

• Foridenticationandsupplyratings,seethetypeplate

at the back or bottom of the product.

• Before you make or change any connections, make sure

that all devices are disconnected from the power outlet.

Charge portable speakers

If the portable left/right speaker is undocked from the

main unit, its battery level is indicated by the LED on

the speaker.

• Light up white: full battery or more than 30%

capacity remaining

• Light up red: low battery level, less than 30%

remaining

• Flash red: near empty, less than 10% remaining

1 Dock your portable speakers into the main unit

to charge.

2 Turn on the main unit.

» During charging, the LED on the portable

speaker lights up orange.

» When fully charged, the LED on the

portable speaker lights up white for

10 seconds.

Note

• It may take around two hours to fully charge the

portable speakers.

• Battery performance varies due to many factors

including volume, sound setting and media played.

Pair up with subwoofer/speakers

The wireless speakers and subwoofer automatically

pair up with the SoundBar for wireless connection

when you turn on the SoundBar, the portable

speakers and the subwoofer.

If no audio from the wireless speakers and subwoofer

can be heard, manually pair up the portable speakers

and the subwoofer.

Pair up with the subwoofer

1 Turn on the SoundBar and the subwoofer.

» If the connection to the SoundBar is lost,

the indicator on the subwoofer blinks white

slowly.

2 Press the CONNECT (connect) button on the

subwoofer to enter the pairing mode.

» The indicator on the subwoofer blinks

white quickly.

3 In OPTICAL mode (press OPTICAL) , within six

seconds, on the remote control, press twice

then Volume + once, and then hold down BASS +.

» If the pairing succeeds, the indicator on the

subwoofer lights up white.

» If the pairing fails, the indicator on the

subwoofer blinks white slowly.

4 If the pairing fails, repeat the steps above.

B5_12_UM_V2.0.indb 6 9/23/2014 1:26:47 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips B5 Fidelio Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips B5 Fidelio

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info