Bedienungsanleitung Philips B5 Fidelio (Seite 11 von 20) (Englisch)

561697

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

English

Option 3: Connect audio through analog

audio cables

Basic quality audio

1 Using an analog cable, connect the AUX

connectors on your SoundBar to the AUDIO

OUT connectors on the TV or other device.

4 Spatial calibration

Spatial calibration is used to achieve the following

convenience, and simultaneously optimizes surround

sound experience for it.

• Have freedom to place the portable left and

right speakers (surround) according to your

need.

• Automatically balance the portable speakers

(surround) with respect to your seating position.

The spatial calibration involves two steps.

• Step 1: calibrate the listening zone

• Step 2: calibrate the surround speaker position

When to calibrate

• Ifyouperformspatialcalibrationfortherst

time, perform Step 1 and Step 2 in sequence.

• If you re-design your seating layout, perform

Step 1 and Step 2 in sequence.

• If you re-locate the portable left and

right speakers (surround), perform Step

2 independently (Step 1 can be skipped).

Before you start

• Make sure that the room is fairly quiet.

• Place the portable left and right speakers angled

towards the main unit.

• Make sure that the main unit, the portable left

and right speakers can fully "see" each other,

no obstacle between them blocking such view.

Stand the portable speakers upright if needed.

• The minimum distance between the portable

speakers and the main unit is 0.8m (2.6'), the

maximum distance 6m (20').

DVD

Step 1: calibrate the listening zone

1 Place the portable left and right speakers on

two seating positions you prefer most (such as

on a sofa).

• Make sure that the portable left and right

speakers are wirelessly connected to

the main unit (press SURROUND ON

DEMAND).

2 Press and hold CALIBRATION on the remote

control for three seconds to trigger calibration.

» ZONE (zone) is displayed on the display

panel.

» You can hear the calibration tones from the

portable speakers.

3 Wait until the calibration tones end.

» ->SPKR (speaker) is displayed on the

display panel.

4 Then perform the following Step 2 (calibrate

the surround speaker position) to complete and

store the new settings.

Step 2: calibrate the surround

speaker position

1 Place the portable left and right speakers

(surround) on the position you prefer.

• Make sure that the portable left and right

speakers are wirelessly connected to

the main unit (press SURROUND ON

DEMAND).

2 Press CALIBRATION once to trigger calibration.

• Press CALIBRATIONthree times to trigger

calibration if you re-locate the portable left

and right speakers and skip Step 1 (calibrate

the listening zone) after you completed a

round of spatial calibration previously.

» You can hear the calibration tones from the

portable speakers.

3 Wait until the calibration tones end.

» If the calibration succeeds, DONE (done) is

displayed on the display panel. And the new

settings are stored.

B5_12_UM_V2.0.indb 9 9/23/2014 1:26:47 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips B5 Fidelio Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips B5 Fidelio

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info