Notes:
• To connect a PC to the display’s RS-232
port,You must use a isstraight-throughl• RS-
232 cable where pins 2 (RX) and 3 (TX) are
not reversed at one end.
• If there are no data to be sent, then the
parameter signal does not need to be sent.
• If multiple commands are transmitted, make
sure to wait for the response for the first
command to come from the display before
sending the next command.The following are
response command
signals:
RESPONSE: 80 70 = MODE ERROR
80 71 = TEM ERROR
80 72 = FORMAT ERROR
Command Parameters
These remote control commands are available to
send to the display using RS-232.
Item Cmd Data Details
Read 80 81-A7 Reads the
displays current
settings for
command 81
thru A7
Volume 81 01-64H
Set between 01-64H
Power On/Off 83 00-01 00=Off, 01=On
Brightness 85 01-64H
Contrast 86 01-64H
V-Size 87 01-64H
V-Position 88 01-64H
H-Size 89 01-64H
H-Position 8A 01-64H
Color 8E 01-64H
Tint 8F 01-64H
Sharpness 90 01-64H
Input Select 91 00-07
00=TV, 01=AV1,
02=AV2, 03=AV3,
04=Component 1
05=Component 2
06=RGB,
07=DVI
Recall 92 00 00=Initiate
recall
Mute On/Off 95 00-01 00=Off 01=On
PanelKey Lock 96 00-01 00=Off 01=On
Language 97 00-02 00=English,
01=French,
02=Spanish
Color Temp 98 00-03 00=High, 01=Mid,
02=Low,
03=6500D
Bass 9A 01-64H
Treble 9B 01-64H
Balance 9C 01-64H
Woofer 9D 00-01 00=Off, 01=On
BBE 9E 00-01 00=Off, 01=On
21
User Manual BDH5011
