Bedienungsanleitung Philips BDH5011 (Seite 47 von 56) (Holländisch)

548

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

Troubleshoot Common Conditions

The following list represents possible anomalies that you may encounter and methods for remedy.

Please refer to this checklist prior to contacting a service representative.

1. The power cord is disconnected.

2. The main power switch on the back of

the display is not switched on.

3. The selected input has no connection.

4. The display is in standby mode in RGB

mode.

No picture displayed 1. Plug in the power cord.

2. Make sure the power switch is

switched on.

3. Connect a signal connection to the

display.

4. Press any key on your keyboard.

Possible CauseSymptom Remedy

1. Caused by surrounding electrical

appliances, cars/motorcycles or fluores-

cent lights.

Interference displayed on

the display or audible noise

is heard

1. Move the display to another location

to see if the interference is reduced.

1. The signal cable is not connected

properly.

Color is abnormal 1. Make sure that the signal cable is

attached firmly to the back of the

display.

1. The signal cable is not connected

properly.

2. The input signal is beyond the

capabilities of the display.

Picture is distorted with

abnormal patterns

1. Make sure that the signal cable is

attached firmly.

2. Check the video signal source to see if

it is beyond the range of the display.

Please verify its specifications with

this display's specification section.

1. If under RGB mode, the H-Size and

V-Size is incorrectly set.

2. If under AV1, AV2, or Component with

480i input, the 4:3 WIDE mode is

switched on.

Display image doesn't fill up

the full size of the screen

1. Use H-Size and V-Size to adjust the size

of the video.

2. Use the WIDE key to scroll through

various full screen modes.

1. Improperly connected source signal

cable.

Can hear sound, but no

picture

1. Make sure that both video inputs and

sound inputs are correctly connected.

1. Improperly connected source signal

cable.

2. Volume is turned all the way down.

3. MUTE is turned on.

Can see picture but no sound

is heard

1. Make sure that both video inputs and

sound inputs are correctly connected.

2. Use VOLUME +/- to hear sound.

3. Switch MUTE off by using the MUTE

button.

1. Some pixels of the plasma display

may not turn on.

Some picture elements do

not light up

1. This display is manufactured using an

extremely high level of precision

technology; however, sometimes some

pixels of the display may not display.

This is not a malfunction. Please see

the enclosed warranty card for more

information.

11. A still picture is displayed for an over

extended period of time.

After-Images can still be

seen on the display after the

display is powered off.

(Examples of still pictures

include logos, video games,

computer images, and

images displayed in 4:3

normal mode)

1. Do not allow a still image to be

displayed for an extended period of

time as this can cause a permanent

after-image to remain on the display.

12. Troubleshooting

User Manual BDH5011

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips BDH5011 Seite 47

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info