Bedienungsanleitung Philips bdl4231c (Seite 10 von 34) (Englisch)

213462

Zoom out

Zoom in

Vorherige Seite

1/34

Nächste Seite

User Manual BDL3231/BDL4231

RETURN TO THE CONTENT

Tilt/Stability - All televisions must comply with

recommended international global safety standards

for tilt and stability properties of its cabinet design.

• Do not compromise these design standards by

applying excessive pull force to the front, or top,

of the cabinet which could ultimately overturn

the product.

• Also, do not endanger yourself, or children, by

placing electronic equipment/toys on the top of

the cabinet. Such items could unsuspectingly fall

from the top of the set and cause product

damage and/or personal injury.

Wall or Ceiling Mounting - The appliance

should be mounted to a wall or ceiling only as

recommended by the manufacturer.

Power Lines - An outdoor antenna should be

located away from power lines.

Object and Liquid Entry - Care should be

taken so that objects do not fall and liquids are not

spilled into the enclosure through openings.

Battery Usage CAUTION - To prevent battery

leakage that may result in bodily injury, property

damage, or damage to the unit:

• Install all batteries correctly, with + and - aligned

as marked on the unit.

• Do not mix batteries (old and new or carbon and

alkaline, etc.).

• Remove batteries when the unit is not used for a

long time.

17.

18.

19.

20.

21.

For ventilation, leave at least 4” to 6” free all around

the monitor. Do not place the monitor on a carpet.

The equipment shall not be exposed to dripping or

splashing.

The equipment shall not be exposed to rain or

moisture and objects ﬁlled with liquids, such as

vases, shall be placed on the apparatus.

The apparatus must be connected to a mains socket

outlet with a protected earthed connection.

The appliance coupler is used as the disconnect

device of this apparatus, the disconnect device shall

remain readily operable.

Outdoor Antenna Grounding - If an outside

antenna is connected to the receiver, be sure the

antenna system is grounded so as to provide some

protection against voltage surges and built up static

charges.

Section 810 of the National Electric Code, ANSI/

NFPA No. 70-1984, provides information with

respect to proper grounding of the mast and

supporting structure, grounding of the lead-in wire

to an antenna discharge unit, size of grounding

connectors, location of antenna-discharge unit,

connection to grounding electrodes, and

requirements for the grounding electrode.

See Figure below.

22.

23.

24.

25.

26.

27.

Note to the CATV system installer:

This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that provides guidelines

for proper grounding and, in particular, speciﬁes that the cable ground shall be connected to the grounding system of the

building, as close to the point of cable entry as practical.

Example of Antenna Grounding as per NEC -

National Electric Code

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips bdl4231c Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info