Bedienungsanleitung Philips BDL4335QL (Seite 43 von 46) (Englisch)

668469

Zoom out

Zoom in

Vorherige Seite

1/46

Nächste Seite

BDL4335QL

9.2. Troubleshooting

Symptom PossibleCause Remedy

Nopictureisdisplayed 1. The power cord is disconnected.

2. The main power switch on the back of the

display is not switched on.

3. The selected input has no connection.

4. The display is in standby mode.

1. Plug in the power cord.

2. Make sure the power switch is switched on.

3. Connect a signal connection to the display.

Interferencedisplayedonthedisplayoraudible

noise is heard

Caused by surrounding electrical appliances or

uorescent lights.

Move the display to another location to see is the

interference is reduced.

Colorisabnormal The signal cable is not connected properly. Make sure that the signal cable is attached rmly

to the back of the display.

Pictureisdistortedwithabnormalpatterns 1. The signal cable is not connected properly.

2. The input signal is beyond the capabilities of

the display.

1. Make sure that the signal cable is attached

rmly.

2. Check the video signal source to see if it

is beyond the range of the display. Please

verify its specications with this display’s

specication section.

Displayimagedoesn’tllupthefullsizeofthe

screen

1. The zoom mode is not set correctly.

2. Scan Mode may be set incorrectly to

underscan.

3. If the image exceeds the screen size, Scan

Mode may need to be set to Underscan.

Use the Zoom mode or Custom zoom function

in the Screen menu to ne tune display geometry

and time frequency parameter.

Canhearsound,butnopicture Improperly connected source signal cable. Make sure that both video inputs and sound

inputs are correctly connected.

Canseepicturebutnosoundisheard 1. Improperly connected source signal cable.

2. Volume is turned all the way down.

3. {Mute} is turned on.

4. No external speaker connected.

1. Make sure that both video inputs and sound

inputs are correctly connected.

2. Press [ ] or [ ] button to hear sound.

3. Switch MUTE off by using the [ ] button.

4. Connect external speakers and adjust the

volume to a suitable level.

Somepictureelementsdonotlightup Some pixels of the display may not turn on. This display is manufactured using an extremely

high level of precision technology: however,

sometimes some pixels of the display may not

display. This is not a malfunction.

After-Imagescanstillbeseenonthedisplay

afterthedisplayispoweredoff.(Examples

ofstillpicturesincludelogos,videogames,

computerimages,andimagesdisplayedin4:3

normalmode)

A still picture is displayed for an over extended

period of time

Do not allow a still image to be displayed for

an extended period of time as this can cause a

permanent after-image to remain on the display.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips BDL4335QL Seite 43

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips BDL4335QL

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info