639196
17
Zoom out
Zoom in
Vorherige Seite
1/26
Nächste Seite
7EN
Note
If you change a setting, make sure that the TV supports
the new setting.
Sound
1
Press .
2 Select [Setup] > [Audio] to access the
audio setup options.
[Night mode]: Select quiet or full dynamic
sound. Night mode decreases the volume
of loud sound and increases the volume of
soft sound (such as speech).
[HDMI audio]: Set an HDMI audio format
when this player is connected through
HDMI.
[Digital audio]: Select an audio format
for the sound output when this player is
connected through a digital connector
(coaxial).
[PCM downsampling]: Set the sampling
rate for PCM audio output when this
player is connected through a digital
connector (coaxial).
Note
For settings related to HDMI, the TV must be
connected through HDMI.
Night mode is only available for Dolby
®
TrueHD /
Dolby
®
Digital Plus encoded DVD and Blu-ray discs.
Preference (languages,
parental control...)
1
Press .
2 Select [Setup] > [Preference] to access
the preference setup options.
[Menu language]: Select an onscreen
display menu language.
[Audio]: Select an audio language for video.
[Subtitle]: Select a subtitle language for
video.
[Disc menu]: Select a menu language for a
video disc.
[Parental control]: Restrict access to discs
that are encoded with ratings. Input "0000"
to access the restriction options. To play all
discs irrespective of the rating, select level
"8".
[Screen saver]: Enable or disable screen
saver mode. If enabled, the screen enters
idle mode after 10 minutes of inactivity (for
example, in pause or stop mode).
[Auto subtitle shift]: Enable or disable
subtitle shift. If enabled, the subtitle position
is changed automatically to t the TV
screen (this feature works with some
Philips TVs only).
[Change password]: Set or change a
password to play a restricted disc. Input
"0000" if you do not have a password or if
you have forgotten your password.
[Auto standby]: Enable or disable auto
standby. If enabled, the player switches to
standby after 18 minutes of inactivity (for
example, in pause or stop mode).
[VCD PBC]: Display or skip the content
menu for VCD and SVCD.
[Auto play disc]: Enable or disable the
automatic disc playback after power on.
[Auto play after video]: Enable or disable
sequential playback of videos from USB.
Note
If your preferred language is not available for disc
language, audio or subtitle, you can select [Other]
from the menu options and input 4-digit language code
which can be found at the back of this user manual.
If you select a language which is not available on a disc,
this player uses the default language of the disc.
17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Philips BDP2510W wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Philips BDP2510W

Philips BDP2510W Bedienungsanleitung - Deutsch - 28 seiten

Philips BDP2510W Bedienungsanleitung - Holländisch - 28 seiten

Philips BDP2510W Bedienungsanleitung - Französisch - 28 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info