Bedienungsanleitung Philips blender 600 w 2 l (Seite 15 von 164) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

380904

Zoom out

Zoom in

Vorherige Seite

1/164

Nächste Seite



If the appliance does not work or does not work properly, rst check the list below or visit the

Philips website at www.philips.com/welcome. If the problem is not mentioned in this list or on the

internet, the appliance probably has a defect. In that case we advise you to take the appliance to

your dealer or to an authorised Philips service centre.

Question Answer

Why doesn’t the

appliance work?

This appliance is equipped with a safety system. The appliance does not

work if the blender jar with lid, the chopper bowl with lid (specic types

only) or the mill beaker (specic types only) are not assembled correctly

on the motor unit or are not assembled at all. Check if you have

assembled the blender jar with lid, the chopper bowl with lid or the mill

beaker correctly (see the various sections in this user manual). Set the

control knob to 0 rst.

Can I clean all

removable parts in the

dishwasher?

Yes, except the motor unit and the coupling unit of the chopper (specic

types only).

What does ‘pulse’

mean?

When you turn the control knob to the pulse setting, the appliance runs

at its highest speed as long as you keep the knob in this position. Use the

pulse setting if you want to have more control over the processing jobs.

Can I pour boiling hot

liquids into the

blender jar?

No, let hot liquids cool down to 80°C/175°F to avoid damage to the jar.

Why does the motor

produce an unpleasant

smell during

processing?

It is common for a new appliance to give off an unpleasant smell or emit

some smoke the rst few times it is used. This phenomenon stops after

you have used the appliance a number of times. The appliance may also

give off an unpleasant smell or emit some smoke if it has been used too

long. In this case, set the control knob to 0 and let the appliance cool

down for 60 minutes.

The appliance stopped

running because the

blade unit is blocked.

What should I do?

Set the control knob to 0 and use a spatula to dislodge the ingredients

that block the blade unit. We also advise you to process a smaller

quantity.

Why does the fruit

juice or soy milk

contain a lot of pulp

or skins?

To prevent pulp and skins from ending up in your drink, make sure that

the lter (specic types only) is placed properly in the jar, the lid is closed

and the measuring cup is inserted in the lid.

The blender jar leaks.

What should I do?

Set the control knob to 0 and pour out the ingredients. Make sure that

the sealing ring is properly in place on the blade unit. Also make sure

that the blade unit is assembled correctly.

 15

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips blender 600 w 2 l Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info