811465
21
Zoom out
Zoom in
Vorherige Seite
1/182
Nächste Seite
21
English
Note: To adjust the light intensity setting manually without using the
SmartSkin button, use the toggle button until you have reached the required
setting. The corresponding intensity light level lights up white.
2Press the SmartSkin button and put the device to your skin.
3After the device has scanned your skin, the light intensity indicators will blink
white to indicate which intensities are most comfortable based on your skin
tone.
4Press the confirmation button to confirm that you want to use the
indicated setting.
Lumea automatically uses the highest indicated intensity, which is shown by
a blinking intensity indicator.
Lumea gives you the freedom to select the light intensity that you find most
comfortable. Skin sensitivity can differ per person. Therefore, the skin test is
the most important guide for selecting your light intensity setting (see 'B
Test skin 24 hours before treatment').
5Using Lumea should never be uncomfortably painful. If you experience
discomfort, reduce the light intensity setting. You can do this by using the
toggle buttons.
Note: The device is automatically disabled when your skin tone is too dark
(dark, according to the skin tone table), to prevent you from developing skin
reactions. The ‘READY to flash’ light will blink orange to indicate if the skin
tone is too dark.
6After moving to another body area or after recent tanning (see 'Using your
Lumea Prestige before and after tanning'), perform a skin test to determine
a comfortable light intensity setting. To re-activate the setting indication
feature, press the SmartSkin button .
Note: Perform a skin test before you start to treat another body area or after
a skin tone change. Determine the light intensity setting for each body area
separately.
Two treatment modes: Stamp & Flash and Slide &
Flash
YourPhilips Lumea has two treatment modes for more convenient use on
different body areas:
-The Stamp & Flash mode is ideal to treat small orcurvy areas like knees and
underarms. Simply press and releasethe flash button to release a single
flash.
21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Philips BRI944 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info