Bedienungsanleitung Philips Bsure 1 (Seite 22 von 30) (Englisch, Holländisch)

328

Zoom out

Zoom in

Vorherige Seite

1/30

Nächste Seite

Projection using a mirror

– Place a mirror (normal flat type) in front of the lens.

– The image reflected from the mirror is projected onto the

screen.

– Optimal image quality is produced with the projector

positioned perpendicular to the screen with all feet flat and

level.

CAUTION!

When using a mirror, be sure to carefully position both the

projector and the mirror so the light does not shine into the

eyes of the audience.

Ceiling-mount Setup

– It is recommended that you use the optional ceiling-mount

bracket for this installation.

– Before mounting the projector, contact your nearest

Authorised LCD Projector Dealer or Service Centre to obtain

the recommended ceiling-mount bracket (sold separately).

– When the projector is in the inverted position, use the upper

edge of the screen as the base line.

– Use the projector’s menu system to select the appropriate

projection mode.

Digital Freeze function (D-Freeze) (on projector keyboard

only)

This function allows you to instantly freeze a moving image.

This is useful when you want to display a still image from a

computer or video, giving you more time to explain the image

to the audience. You can also use this function to display a still

image from a computer while you make preparations for the

next computer images to be presented.

1. Press D-Freeze to freeze the image.

2. Press D-Freeze again to return to the moving image.

Digital image magnification (D-Zoom)

This function allows you to magnify a specific portion of an

image. This is useful when you want to display a detailed

portion of the image.

1. Press D-Zoom. Each time D-Zoom is pressed, the image will

be magnified.

2. When the image is magnified, you can pan and scan around

the image by using 3 , 4 , 1 or 2.

– Each time D-Zoom is pressed, image magnification toggles

as shown below.

x1 x2 x3 x4 x6 x8

– If the input signal is changed during digital image

magnification, the image will return to 1.

The input signal is changed:

• when Data 1, Data 2 or Video is pressed on the projector, or

Input on the remote control,

• when the input signal is interrupted, or

• when the input resolution and refresh rate changes.

Digital Video Effect correction (V-Effect) (on projector

keyboard only)

– V-effect is an image quality enhancement function that offers

a richer image by brightening the darker portions of the

image without altering the brightness of the brighter

portions.

– Two V-effect settings are available to allow for differences in

the images played and in the brightness of the room.

– When you are watching images with frequent, dark scenes,

such as a film or concert, or when you are watching images

in a bright room, this feature makes the dark scenes easier

to see and gives the impression of greater depth in the

image.

V-Effect Modes

Selected Mode V-effect

V-Effect off Standard picture without Video Effect

correction.

V-Effect on Gives greater depth to darker portions of

image.

• Press V-Effect. Each time V-Effect is pressed, the V-effect

level toggles as shown below.

V-EFFECT

OFF

SCREEN

8. OPERATION Other settings

English

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips Bsure 1 Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips Bsure 1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info