Electromagnetic elds (EMF)
- This Philips appliance complies with all
applicable standards and regulations regarding
exposure to electromagnetic elds.
General
- The appliance is suitable for mains voltages
ranging from 100 to 240 volts.
- The supply unit transforms 100-240 volts to a
safe low voltage of less than 24 volts.
Display
Battery status indications
When the battery is almost empty, the bottom light
ashes orange (Fig. 3) .
When the appliance is charging, rst the bottom
charging light ashes white, then the second charging
light (Fig. 4) , and so on. When the battery is fully
charged, all lights light up white continuously (Fig. 5).
Note: The lights switch o automatically after
30 minutes.
Remaining battery capacity
The remaining battery charge is shown by the lights of
the battery charge indicator that light up continuously.
Hair length indications
The selected hair length setting will show on the
digital display when you select the desired length
setting with the zoom wheel (Fig. 6) .
Charging
Charging takes approx. 1 hour. Charge the appliance
before you use it for the rst time and when the
display indicates that the battery is almost empty.
1 Make sure the appliance is switched o.
2 Put the adapter in the wall socket and put the
small plug in the appliance (Fig. 7) .
3
After charging, remove the adapter from the wall
socket and pull the small plug out of the appliance.
When the appliance is fully charged, it has a
cordless operating time of up to 80 minutes.
Using the appliance
Note: This appliance can be used without cord or
directly from the power outlet.
You can use this appliance for a stubble and
a short beard. This appliance has an integrated
vacuum system that catches cut beard hair for
a less mess trimming experience.
The vacuum system is activated automatically as
soon as you switch on the appliance.
Note: Switch o and clean the appliance after
each use.
Switching the appliance on and o
Press the on/o button once to switch the
appliance on or o (Fig. 8) .
Trimming without comb
- You can use the appliance without beard and
stubble comb to trim hair close to the skin or
to contour the neckline and sideburns. To trim
hair close to the skin, place the at side of the
trimming head against your skin and make
strokes in the desired direction (Fig. 9) .
- For contouring hold the trimming head
perpendicular to the skin and move the
trimming head upwards or downwards with
gentle pressure (Fig. 10) .
- You can use the precision trimmer to create
ne lines and contours around your facial style,
close to the skin (Fig. 11) . Simply pull the cutting
element straight o (Fig. 12) and insert the
precision trimmer (Fig. 13) .
Trimming with comb
Note: When you trim for the rst time, start at the
highest length setting to familiarise yourself with
the appliance.
- You can use the beard and stubble comb
attached to the cutting element to groom your
beard and moustache in your preferred style. For
the beard and stubble comb, you can turn the
zoom wheel to choose from 20 length settings
ranging from 0.5mm to 10mm in steps of 0.5mm
(Fig. 6 ).
- You can use the precision trimmer with a detail
comb attached for precision trimming of your
sideburns, moustache or beard (Fig. 14) . This
appliance comes with 2 dierent detail combs:
5mm (L) and 3mm (M).
1 Attach the detail comb (Fig. 15) or the beard
and stubble comb onto the appliance (Fig. 16) .
2 Switch on the appliance.
3 To trim most eectively, move the appliance
against the hair growth direction (Fig. 17) . Make
sure that the surface of the comb always stays
in contact with the skin.
Cleaning and maintenance
Cleaning the appliance
Note: Only the cutting element and the comb can
be cleaned with water.
We advise you to empty the hair-collection chamber
after each trimming session. When you trim long,
dense beards, it may also be necessary to empty the
hair-collection chamber during the trimming session
in order to maintain optimal suction performance.
1 Switch o the appliance and disconnect it from
the power outlet.
2
Wipe the housing of the appliance with a dry
cloth.
3
Remove the comb (Fig. 18) and clean it with the
cleaning brush and/or rinse it under the tap (Fig. 19).
4 Remove the cutting element and clean it under
the ta
p (Fig. 20).
Shake o excess water and
leave to dry completely.
Caution: Never dry the cutting element with a towel
or tissue, as this may damage the trimming teeth.
5 Shake and/or brush out the hairs that have
collected in the hair chamber (Fig. 21, Fig. 22) .
6 After cleaning, reattach the cutting element
(Fig. 23) and comb (Fig. 16) to the appliance.
Recycling
- This symbol means that this product shall not
be disposed of with normal household waste
(2012/19/EU) (Fig. 24).
- This symbol means that this product contains a
built-in rechargeable battery which shall not be
disposed of with normal household waste
(Fig. 25) (2006/66/EC). We strongly advise you
to take your product to an ocial collection
point or a Philips service centre to have a
professional remove the rechargeable battery.
- Follow your country’s rules for the separate
collection of electrical and electronic products
and rechargeable batteries. Correct disposal
helps prevent negative consequences for the
environment and human health.
Warranty and support
If you need information or support, please
visit www.philips.com/support or read the
international warranty leaet.
DEUTSCH
Allgemeine Beschreibung (Abb. 1)
1 Schneideelement
2 Vakuumsystem
3 Schnittlängeneinstellungen
4 Zoom-Rädchen
5 Ein-/Ausschalter
6 Akkustandanzeige
7 Tasche
8 Reinigungsbürste
9 Reinigungsschwamm
10 Gerätestecker
11 Netzteil (Adapter)
12 Präzisionstrimmer
13 Detailkamm 5 mm (L)
14 Detailkamm 3 mm (M)
15 Bart- und Stoppelkamm
Hinweis: Das mitgelieferte Zubehör kann
für verschiedene Produkte variieren. Die
Verpackung zeigt das Zubehör, das mit Ihrem
Gerät mitgeliefert wurde.
Wichtige Sicherheitsinformationen
Lesen Sie diese wichtigen Informationen vor
dem Gebrauch des Geräts und des Zubehörs
aufmerksam durch, und bewahren Sie sie für
eine spätere Verwendung auf. Das mitgelieferte
Zubehör kann für verschiedene Produkte variieren.
Gefahr
- Halten Sie das Netzteil
trocken (Abb. 2 ).
Warnung
- Der Adapter enthält einen
Transformator. Ersetzen Sie
den Adapter keinesfalls durch
einen anderen Stecker, da dies
den Benutzer gefährden kann.
- Dieses Gerät kann von
Kindern ab 8 Jahren und
Personen mit verringerten
physischen, sensorischen
oder psychischen Fähigkeiten
oder Mangel an Erfahrung
und Kenntnis verwendet
werden, wenn sie bei der
Verwendung beaufsichtigt
werden oder Anleitung zum
sicheren Gebrauch des Geräts
erhalten und die Gefahren
verstanden haben. Kinder
dürfen nicht mit dem Gerät
spielen. Die Reinigung und
Pege des Geräts darf von
Kindern nicht ohne Aufsicht
durchgeführt werden.
- Überprüfen Sie das Gerät
vor jedem Gebrauch. Um
Verletzungen zu vermeiden,
benutzen Sie das Gerät
nicht, wenn es beschädigt ist.
Ersetzen Sie ein beschädigtes
Teil nur durch Originalteile.
- Önen Sie das Gerät nicht,
um den Akku zu ersetzen.
Achtung
- Dieses Gerät ist nicht
wasserdicht. Tauchen Sie
es nicht in Wasser, und
halten Sie es nicht unter den
Wasserhahn (Abb. 2).
- Verwenden Sie dieses Gerät nur
für den vorgesehenen Zweck
wie in der Bedienungsanleitung
angegeben.