English
22
•You can program up to 99 tracks to play in any desired
sequence.
•Tracks can be programmed more than once, but each time
counts as a track (STEP).
Programming
1 In Stop mode press PROGRAM to enter Program mode.
➜ PROG flashes and PROGRAM followed by track
information appears on the display.
2 Select the required track numbers by turning the EASY
JOG/ENTER key left or right and store by pressing ENTER.
or:
Key in a track number with the number keys and press
ENTER to confirm. For 2-digit numbers, press the keys in
rapid succession.
➜ The track will be stored in the program.
➜ The track number, total program time and the number of
programmed tracks (STEPS) are displayed.
3 Repeat step 2 for all tracks to be programmed.
4 Press STOP or PROGRAM to end programming.
➜ PROG lights continuously.
5 Press PLAY/PAUSE 2;to start programmed play.
Note:
- To review the program, press PROGRAM followed by 5 or
6 with the CD recorder in Stop mode.
- To add more tracks to the program, repeat steps 1 to 5.
- If you try to store more than 99 tracks, PROG FULL
appears on the display.
Clearing a program
1 Press STOP 9 if necessary to stop programmed play.
2 Press STOP 9 again to clear the program.
➜ PROG disappears from the display.
•The program is also cleared if you open the disc tray.
Erasing a track from a program
1 In Stop mode press PROGRAM to enter Program mode.
2 Use 5 or 6 to select the track from which to delete.
➜ The track number and program step will be shown on
the display.
3 Press CANCEL to erase the track from the program.
➜ The remaining program steps and the remaining playing
time of the program will be displayed.
