English
22
1 Press REPEAT one or more times during CD play.
➜ When REPEAT TRACK lights up, the current track plays
repeatedly. When REPEAT ALL lights up, the disc or
program plays repeatedly.
2 To return to normal play, press REPEAT one or more times
until:
➜ The REPEAT label disappears from the display.
Note:
- You can use shuffle in combination with
REPEAT ALL
or
programmed play.
-
REPEAT
is also cleared if you open the disc tray.
•You can program up to 99 tracks to play in any desired
sequence.
•Tracks can be programmed more than once, but each time
counts as a track (STEP).
Programming
1 In Stop mode press PROGRAM to enter Program mode.
➜ PROGRAM flashes and PROGRAM appears on the display.
2 Select the required track numbers by turning the EASY
JOG/ENTER key left or right and store by pressing ENTER.
or:
Key in a track number with the number keys. For 2-digit
numbers, press the keys in rapid succession.
➜ The track will be stored in the program.
➜ The track number, total program time and the number of
programmed tracks (STEPS) are displayed.
3 Repeat step 2 for all tracks to be programmed.
4 Press STOP or PROGRAM to end programming.
➜ PROGRAM lights continuously.
5 Press PLAY/PAUSE 2;to start programmed play.
Note:
- To review the program, press PROGRAM, followed by 5 or
6 with the CD recorder in Stop mode.
- To add more tracks to the program, repeat steps 1 to 5.
- If you try to store more than 99 tracks, PROG FULL
appears on the display.
Clearing a program
1 Press STOP 9 if necessary to stop programmed play.
2 Press STOP 9 again to clear the program.
➜ PROGRAM disappears from the display.
•The program is also cleared if you open the disc tray.
Erasing a track from a program
1 In Stop mode press PROGRAM to enter Program mode.
2 Use 5 or 6 to select the track from which to delete.
➜ The track number and program step will be shown on
the display.
3 Press CANCEL to erase the track from the program.
➜ The remaining program steps and the remaining playing
time of the program will be displayed.
