Bedienungsanleitung Philips CMD310 (Seite 26 von 29) (Englisch)

698760

Zoom out

Zoom in

Vorherige Seite

1/29

Nächste Seite

26EN

14 Troubleshooting

Warning

• Never remove the casing of this product.

To keep the warranty valid, never try to repair

the product yourself.

If you encounter problems when using this

product, check the following points before

requesting service. If the problem remains

unsolved, go to the Philips Web page

(www.philips.com/support). When you contact

the Consumer Care, make sure that the

product is nearby and the model number and

serial number are available.

General

No power or no sound.

• The power supply from car battery is cut

off, or the car battery runs out of energy.

Power the system with car battery.

• Car engine is not on. Turn the car engine on.

• Cable is not correctly connected. Check

connections.

• Fuse is burnt. Replace fuse.

• Volume is too low. Adjust volume.

• If the above solutions cannot help, press

the RESET button.

• Make sure that the current track is in a

compatible format.

Noise in broadcasts.

• Signals are too weak. Select other stations

with stronger signals.

• Check the connection of the car antenna.

• Change the broadcast setting from stereo

to mono.

Preset stations lost.

• Battery cable is not correctly connected.

Connect the battery cable to the terminal

that is always live.

Display show ERR-12

• USB data error. Check the USB storage device.

GPS signal reception of the iPhone or iPod

touch is poor.

• Remove the iPhone or iPod touch from

the dock, and place it in aother location for

better signal reception.

About Bluetooth device

Cannot pair the Bluetooth enabled device

with the car audio system.

• Thedevicedoesnotsupporttheproles

required for the system.

• The Bluetooth function of the device is not

enabled. Refer to the user manual of the

device for how to enable the function.

The audio quality is poor after connection

with a Bluetooth-enabled device.

• The microphone is not correctly

positioned. Adjust the position of the

microphone. For example, stick the

microphone onto the dashboard where

close to the driver.

• The Bluetooth reception is poor. Move the

device closer to the car audio system or

remove any obstacle between the device

and the system.

Music playback is unavailable on the system

even after successful Bluetooth connection.

• The device cannot be used with the

system to play music.

The paired mobile phone connects and

disconnects constantly.

• The Bluetooth reception is poor. Move

the mobile phone closer to the car audio

system or remove any obstacle between

the mobile phone and the system.

• Some mobile phones may connect and

disconnect constantly when you make

or end calls. This does not indicate any

malfunction of the system.

• For some mobile phones, the Bluetooth

connection may be deactivated

automatically as a power-saving feature.

This does not indicate any malfunction of

the system.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips CMD310 Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips CMD310

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info