Bedienungsanleitung Philips CRYSTAL650 (Seite 52 von 80) (Englisch)

26364

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

52 12. Troubleshooting

Machine Functions

Cleaning and Aligning

Cartridges

If the printing quality declines, the cartridges must be

cleaned or realigned.

1 Press MENU/OK and 8211. e cartridges

are cleaned.

2 Start the cartridge alignment with MENU/OK

and 8212. Your multifunction machine will

print out a test page to automatically conﬁgure

the correct parameter settings for the best possible

printing quality.

For optimal printing quality, we recommend

aligning the cartridges after every change.

If the printing quality is still unsatisfactory, you must

manually clean the cartridges:

1 Open the machine and take the cartridges out of

the holder (see also Changing Cartridges). Clean

the contacts (A) with a dry, lint-free cloth.

2 Lay a lint-free cloth on a ﬂat surface. Moisten half

the cloth (A). Hold the cloth ﬁrmly to prevent it

from wrinkling. Place the “nose” (= nozzle side) of

the cartridges against the moistened area (A) and

pull the cartridge a single time in the direction in-

dicated by the arrow (B) into the dry area (C).

Be sure to hold the cartridge in the correct po-

sition according to the ﬁgure above to prevent

damaging the nozzles!

Never touch the nozzles and contacts with bare

ﬁngers and do not shake the cartridges.

Service Codes

With function 83 you can check and conﬁgure the fac-

tory settings.

Checking the Firmware Version

e ﬁrmware deﬁnes the basic functions and capabili-

ties of your multifunction machine.

Check our homepage for information on the current

ﬁrmware version that is available for your machine

and update the ﬁrmware, if necessary (see section PC

Functions / Using C S IH / Firmware

Update).

1 Press MENU/OK and 83.

2 Enter the following code using the number keypad:

704100, then press OK.

3 Use / to select ARE YOU SURE: YES, and

conﬁrm with OK. e display shows the current

ﬁrmware version of your machine.

If you have entered the incorrect code, you

can cancel the entry with ARE YOU SURE:

NO.

Deactivating the Button

Sounds

Every button press is accompanied by a sound. You can

switch oﬀ the button sounds on your machine.

1 Press MENU/OK and 83.

2 Enter the following code using the number keypad:

102300, then press OK.

3 Use / to select ARE YOU SURE: YES, and con-

ﬁrm with OK. e button sounds are deactivated.

Follow steps 1 to 3 to reactivate the button tones.

If you have entered the incorrect code, you

can cancel the entry with ARE YOU SURE:

NO.

Power Cycling

If a problem occurs that cannot be corrected with the

instructions in this user manual, follow the steps be-

low.

1 Unplug the power cord.

2 Wait at least ten seconds, then plug the power cord

back in.

3 If the same problem continues to occur, please con-

tact our technical customer service (see back page

of this user manual) or contact your retailer.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips CRYSTAL650 Seite 52

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips CRYSTAL650

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info