Bedienungsanleitung Philips CRYSTAL650 (Seite 72 von 80) (Englisch)

26364

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

72 Appendix

standard. Group 4 fax machines are

digital devices that function exclusively

on ISDN systems. ey have a maxi-

mum transfer speed of 64,000 bps.

Fax Polling: e option of retrieving

documents from another fax machine

(active) or making documents avail-

able to be retrieved by other fax ma-

chines (passive).

Fax Switch: If you operate the

multifunction machine and an exter-

nal telephone on the same line, the

(passive) fax switch distinguishes fax

calls from other calls. Fax switches can

be either “active” or “passive”. Your

multifunction machine has an active

fax switch (see Active Fax Switch).

Fax Tone (CNG Signals): see CNG

Tone (Calling Signal)

Firmware Upload: Updating the de-

vice functionality.

Firmware: Program code stored in

Flash memory that controls the basic

functions of a device. Sometimes also

referred to as the device driver.

Gateway (Router): Devices for trans-

ferring data between networks. e

router forwards the data that arrive at

the gateway. If your network commu-

nicates with other networks, you may

have to conﬁgure the gateway IP address

(please contact your network provider).

High-Power Connection: see USB

Identification Presentation (Call-

ing Line Identification Presenta-

tion, CLIP): ere are two types of

caller ID: Telephone number display

for incoming calls and sending of the

telephone number for outgoing calls.

Your telephone company must oﬀer

both services and must enable them

for your phone connection. e send-

ing of the telephone number can be

disabled temporarily or completely

(= telephone number suppression).

Infrared (also IrDA-Infrared Data

Association): Data transmission via

infrared at distances up to one meter.

A visual connection must exist between

the IrDA ports. With the OBEX pro-

tocol (Object Exchange Protocol) you

can transfer ﬁles unidirectionally from

Bluetooth-capable devices to your

multifunction machine.

Infrastructure Network: see Net-

works.

Ink Level Memory: Your multifunction

machine keeps track of the ink con-

sumption of each printout and uses

this information to calculate the ink

level of the cartridges. e indicated

ink level is only meaningful if you up-

date each new ink cartridge with the

Plug’n’Print card that is provided with

the cartridge (see also Plug’n’Print

Card).

IP Address: Sequence of numbers

separated by periods (= address) for

identiﬁcation of computers that are

connected to the Internet or a WLAN

network (see also TCP/IP).

Journal: A report of the documents

sent and received. e journal is ei-

ther printed out automatically after

30 transmissions or you can print it

out manually when needed (see sec-

tion Machine Functions / Trouble-

shooting / Printing the Journal)

Low-Power Connection: see USB

Dual Tone Multi-frequency

(DTMF): see Tone Dialling

Modem: A modem converts digital

computer signals into acoustic signals

and vice versa.

Networks: Connection between two or

more computers and/or other network

devices, such as printers, modems or

routers. In a LAN (Local Area Net-

work), network components can also

be connected by radio instead of by

cables: Wireless Local Area Network

(WLAN). Networks have diﬀerent

structures (= architecture). In an infra-

structure network, all devices are con-

nected to a single access point. Data is

exchanged in the network through this

access point. In an ad-hoc network, the

devices communicate with each other

directly, without an access point.

Outside Line Access Code: e

outside line access code is the number

(usually “0”) or letter (usually “R”)

that must be dialled before the actual

telephone number on a private branch

exchange in order to establish a connec-

tion to the public telephone network.

Parallel Connection: see Additional

Devices

Plug’n’Print Card: Chip card for up-

dating newly inserted ink cartridges. A

cartridge that has once been activated

with the corresponding Plug’n’Print

card will be recognised again, even if

you remove the cartridge temporarily.

Polling: see Fax Polling

POP (Post Office Protocol): Internet

protocol for downloading e-mail.

Protocols: Standardised rules and

conventions for transmitting data in

networks (e. g. TCP/IP: the most well-

known protocol for Internet commu-

nication, used by almost all operating

systems; IEEE 820.11b: typical wire-

less network protocol; standard ITU

T30 for fax transmissions).

Pulse Dialling: A dialling process that

is used in older telephone networks.

You hear a “clicking” for each number

dialled.

Resolution: Number of dots per inch

(dpi). e following settings are avail-

able to you for fax transmissions:

standard, ﬁne h, superﬁne f, photo

F and for colour faxes COL. For

copying, the available resolutions are

draft, NORMAL and photo.

Scanning: Reading a document via the

ﬂatbed scanner for sending as a mes-

sage, copying, faxing or editing on the

PC.

Sender identification (= header):

Display of the telephone number,

name, date and time on outgoing mes-

sages.

Serial Connection: see Additional

Devices

Speed Dialling: In addition to the tele-

phone book, nine speed dialling but-

tons are available to you for frequently

dialled numbers.

Stand-alone: Your multifunction ma-

chine even functions independently of

a PC or network connection.

TCP/IP (Transmission Control

Protocol over Internet Proto-

col): Fundamental Internet connec-

tion protocol, often also used as a col-

lective term for the Internet protocol

suite.

Telephone Book Index: e entries

saved in the telephone book are au-

tomatically sorted alphabetically and

can be accessed quickly by pressing the

initial letters.

Philips CRYSTAL650 Seite 72

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips CRYSTAL650

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info