668474
33
Zoom out
Zoom in
Vorherige Seite
1/42
Nächste Seite
31EN
synchronized, make sure the current
year is set.
1
Press MENU/OK.
2
Select [SERVICES] > [AUTO
CLOCK], then press MENU/OK to
conrm.
3
Select [ON]/[OFF], then press
MENU/OK.
» The setting is saved.
Register the handset or
additional handsets
You can register additional handsets
to the base station. The base station
can register up to 4 handsets.
1
You can register your handset as
follows:
If the handset is in
[UNREGISTERED] status, press
MENU/OK.
If the handset is in
[SEARCHING] and
[UNAVAILABLE] status, press
MENU/OK > [SERVICES] >
[REGISTER] > MENU/OK.
2
Press and hold on the base
station for 10 seconds.
3
Enter the system PIN. Press
REDIAL/C to make corrections.
Then press MENU/OK to conrm
the PIN.
» Registration is complete in
less than 2 minutes. The base
automatically assigns a handset
number to the handset.
Note
If the PIN is incorrect or no base is found
within a certain period, a notication
message will be displayed on your handset.
If registration fails, unplug the power adapter
from the base station and plug it back.
Wait for 15 seconds, and then repeat the
registration procedure.
The preset PIN is 0000. No change can be
made on it.
The handset and the base station are GAP
compliant, which means they guarantee the
minimum functions: register a handset, take
the line, make a call and receive a call. The
advanced features may not be available if
you use them with other makes.
To register the handset to another
GAP-compliant base station, follow the
registration procedure of that base station.
Unregister the handsets
If two or more handsets share the
same base station, you can unregister
the handset or other handsets.
1
Press MENU/OK.
2
Select [SERVICES] >
[UNREGISTER], then press
MENU/OK to conrm.
3
Enter the system PIN. (The preset
PIN is 0000). Press REDIAL/C to
remove the number.
4
Select the handset number to be
unregistered.
5
Press MENU/OK to conrm.
» The handset is unregistered.
Tip
The handset number is displayed beside the
handset name in standby mode.
33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Philips D1402 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Philips D1402

Philips D1402 Kurzanleitung - Deutsch - 11 seiten

Philips D1402 Bedienungsanleitung - Deutsch - 45 seiten

Philips D1402 Kurzanleitung - Englisch - 10 seiten

Philips D1402 Kurzanleitung - Holländisch - 10 seiten

Philips D1402 Bedienungsanleitung - Holländisch - 44 seiten

Philips D1402 Kurzanleitung - Französisch - 10 seiten

Philips D1402 Bedienungsanleitung - Französisch - 44 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info