Bedienungsanleitung Philips D6302 (Seite 49 von 56) (Englisch)

609138

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

47EN

21 Frequently

asked questions

No signal bar is displayed on the screen.

• The handset is out of range. Move it closer

to the base station.

• If the handset displays [Register your

Handset], put the handset on the base

until the signal bar appears.

Tip

• For further information, see 'Register additional

handsets' on the Services section.

If I fail to pair (register) the additional

handsets to the base station, what do I do?

• Your base memory is full. Unregister

the unused handsets and try again (see

'Unregister handsets' on page 42).

• If registration fails, unplug the power

adapter from the base station and plug it

back. Wait for 15 seconds, and then repeat

the registration procedure (see 'Register

additional handsets' on page 42).

My handset is in searching or unavailable

status, what do I do?

• Make sure that the base station has power

supply.

• Move the handset closer to the base

station.

• Register the handset to the base station.

I have chosen a wrong country in Welcome

screen, what do I do?

Reset your phone settings to the original

factory settings (see 'Restore default settings'

on page 42).

I have chosen a wrong language which I cannot

read, what do I do?

1 Press to go back to the standby screen.

2 Press to access the main menu screen.

3 Press / to select , then you see

one of the following texts appear on the

screen:

Langue

Language

Idioma

4 Select it to access the language options.

5 Select your own language.

The handset loses connection with the base

or the sound interrupts during a call.

• The handset is nearly out of range. Move it

closer to the base station.

• Check if the ECO mode is activated. Turn it

off to increase the handset range and enjoy

the optimal call conditions.

• Re-register the handset to the base station.

No dialing tone.

• Check your phone connections.

• The handset is out of range. Move it closer

to the base station.

No docking tone.

• The handset is not placed properly on the

base station/charger.

• The charging contacts are dirty. Disconnect

the power supply rst and clean the

contacts with a damp cloth.

I cannot change the settings of my voice mail,

what do I do?

The voice mail service is managed by your

service provider but not the phone itself.

Contact your service provider to change the

settings.

The handset on the charger does not charge

or the battery discharges too fast.

• Make sure the batteries are inserted

correctly.

• Make sure the handset is placed properly

on the charger. If the docking tone is

turned on, you can hear the docking

tone when you place the handset on the

charging cradle.

• The charging contacts are dirty. Disconnect

the power supply rst and clean the

contacts with a damp cloth.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips D6302 Seite 49

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips D6302

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info