MORE ON YOUR REMOTE CONTROL
SETTING UP YOUR REMOTE CONTROL
By default, your remote control is preset to control most of the Philips audio video appliances.
If you have other brands of appliances, or if the presets do not control your Philips appliance,
please follow the following procedure.
Note:
some of the functions described in the next pages may not be available or have the same
behaviour for all appliances.
1. using the mode button, go to the destination mode which you want to set up (TV, VCR, DVD
or Amp/Tuner).
2. Press digits 1 and 3 simultaneously for 3 seconds. After 3 seconds, the lights corresponding
the the destination mode will blink twice and remain on.
3. Enter the 4 digit code within 60 seconds. You will find a list of codes at the end of this
manual. (If several codes are possible, go through this procedure with the 1st code and try
your remote control. If you are not successful, repeat the procedure with the second code,
and so on).
4. If a valid 4-digit code has been entered, the lights will switch off and blink twice. If not, go
back to step 1.
Pressing any key other than digit keys and stand-by button will automatically exit this procedure.
If you wish to check that you have entered the right code:
1. press digits 1 and 6 simultaneously for more than 3 seconds. The destination mode lights will
blink twice and turn off.
2. Press digit 1: the number of blinks of the destination mode light is the first number of the
code.
3. Press digit 2: the number of blinks of the destination mode light is the second number of the
code.
4. Press digit 3: the number of blinks of the destination mode light is the third number of the
code.
5. Press digit 4: the number of blinks of the destination mode light is the fourth number of the
code.
No blinks indicates a zero.
Keys should be pressed within 60 seconds of each other in order not to exit the procedure.
At the end of the procedure, the remote control will return to normal mode.
32
