Bedienungsanleitung Philips dtr 200 (Seite 11 von 18) (Englisch)

424715

Zoom out

Zoom in

Vorherige Seite

1/18

Nächste Seite

OPERATION 11

English

2 Switch the active antenna On by using the arrow button

 or  .

3 Press the EXIT button.

4 Highlight the automatic scan mode and press the OK

button.

5 Set the start or stop frequency via the arrow button 

or .

6 Specify by the arrow buttons whether all channels or

channels that are free-to-air only are to be searched.

7 Then highlight OK and press the OK button to start the

automatic scan mode

Following, the scan mode is started. After the search is

completed, the following is displayed:

8 By using the arrow button  or , choose whether

- the channels found are to be added to the old list

(standard setting),

- the old channel list is to be overwritten,

- the new found channels are to be discarded.

9 Then press the OK button.

Expert scan mode

This type of scan mode enables the specific search for an

individual channel. This in particular makes sense if you

only want to include one individual channel into your

channel list and you know the information on the channel

and frequency.

1 Highlight the expert scan mode and press the OK but-

ton.

2 Successively select the adjustable values by using the

arrow button 

=or=.

- The desired frequency is set by the arrow button 

or  .

- The frequency in MHz is entered via the numerical

buttons of the remote control.

- The desired band width is set via the arrow buttons.

3 Choose whether all channels or channels that are free-

to-air only are to be searched for.

4 Then highlight OK and press the OK button to start the

expert scan mode.

Following, the scan mode is started.

- If some channels were found, you receive the same

request as with regard to the automatic scan mode, see

previous paragraph.

- If no channels were found, a message is displayed. Press

the OK button.

EPG

The electronic programme guide (EPG) offers you an

overview of all programmes to be broadcasted in the next

week on the current channel.

Observe:

- Not all channels offer an extensive EPG.

- Many broadcasting services broadcast the current day

programme but do not offer detailed descriptions.

- There are broadcasting services that do not offer any

EPG information.

- Due to the progressive technical development, more

and more broadcasting services will extend this offer in

the future.

1 Select the desired channel.

2 Press the EPG button to call up the electronic pro-

gramme guide.

The following functions are offered to you by the EPG:

- If you require more information on a programme, high-

light it by using the arrow button 

=or=, and press

the INFO button.

- Change to the programme of another day by using the

arrow button . By means of the arrow button

you can return.

- In order to switch between the programmes of the

afternoon and evening, press the colour buttons dis-

played in the EPG.

GB_Anleitung_Philips_DTR200_Englisch.book Seite 11 Montag, 24. Oktober 2005 10:47 10

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips dtr 200 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips dtr 200

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info