English
26 PREPARATION
Important:
The ‘Colour settings’ and ‘Personal colour’ settings are only active when
the video mode ‘Active control’ is switched ON or/and the ‘Digital
Natural Motion’ (DNM) feature is switched ON. See below table 1.
Video Mode Digital Natural Motion Colour settings/
(Active Control) Personal colour
ON OFF Available
OFF ON Available
ON ON Available
OFF OFF Not available
Active Control (not for CVBS and S-video)
With Active Control switched on, the player continuously monitors and
corrects the signal coming from the DVD-Video to ensure you always
have the best possible picture, and that all discs you play have the same
appearance.
● To select the default Active Control setting on your player, select
p from the Personal Preferences menu then select Active Control.
● Using the vwbuttons on the remote control, select Active
Control ON or OFF.
● Press OK to confirm and return to the main menu.
➤ The Active Control default setting you have chosen will now
apply whenever you switch the player on.
Sound
Digital output
Factory setting ALL means that both coaxial and optical outputs are
switched on. If you are not connecting equipment with a digital input,
change the setting to OFF.
If your equipment doesn’t include a digital multi-channel decoder, set
the digital output to PCM (Pulse Code Modulation). Both coaxial and
optical outputs are then switched on for PCM only.
Analog output
Select Stereo or Dolby Surround or 3D sound.
3D sound
In a setup without rear speakers (analog stereo output), 3D Sound
remixes the available channels of digital surround (Dolby Digital and
MPEG-2) into a two speaker output, while retaining all of the original
audio information. The result is the listening sensation of being
surrounded by multiple speakers.
Dolby Surround
When using audio equipment with a Dolby Surround decoder select this
option. In this option, the 5.1 channels of audio (Dolby Digital and
MPEG-2) are downmixed to a Dolby Surround compatible 2 - channel
output.
