Bedienungsanleitung Philips DVDR730 (Seite 138 von 158) (Deutsch, Englisch)

1071

138

Zoom out

Zoom in

Vorherige Seite

1/158

Nächste Seite

General

Use 'Programming a recording (TIMER)', to automatically start and stop

a recording at a later date.

The DVD recorder will switch to the right programme number and

begin recording at the correct time.

With this DVD recorder, you can pre-programme up to six recordings

within a period of one month.

To make a programmed recording, your DVD recorder needs to

know:

* the date you want to make the recording

* the programme number of the TV channel

* the start and stop time of the recording

* VPS or PDC on or off

* the recording mode (picture quality) ('M1/M2/M2x/M3/M4/M6/M8')

Fit to space Recording

You can select also the recording mode 'FR'.

With these setting the recording mode (bit rate) will be automatically

calculated to use the complete empty space (title 'Empty').

If the empty space is too small the recording will be stopped to prevent

the following titles from being overwritten.

This information is saved in a 'TIMER block'.

Before you begin, make sure the clock is set. If the clock is not set, the

'Time/Date' menu will appear when you press the TIMER s button.

What is 'VPS/PDC'?

- 'VPS' (Video Programming System)/'PDC' (Programme Delivery Control)

are used to control the start and duration of TV channel recordings. If

a TV programme starts earlier or ends later than was scheduled, the

DVD recorder will then turn on and off at the correct time.

What do I need to know about 'VPS/PDC'?

- Usually the start time is the same as the VPS or PDC time. If a

different 'VPS/PDC time' is indicated, e.g.: '20.15 (VPS/PDC 20.14)',

the VPS/PDC time '20.14' must be entered exactly to the minute

during programming.

If you want to programme a time that is different from the VPS or PDC

time, you must switch off VPS or PDC.

- Only one TV program of a TV channel can be controlled using

'VPS/PDC' at a time. If you want to record two or more TV

programmes on a TV channel using 'VPS/PDC', you will need to

programme these as two separate recordings.

- Since the DVD recorder requires a certain 'lead time' (for getting the

disc up to speed and positioning the laser) before recording can start, it

is possible that the recorder will miss the first few seconds of a TV

show recorded with VPS/PDC.

In this case, disable VPS/PDC and enter a start time one minute

earlier.

Programming recordings with the

ShowView

System

Thanks to this programming system, you no longer need to tediously

enter the date, programme number, start and finish times. All the

information needed by the DVD recorder for programming is

contained in the ShowView

programming number. This 9-digit

ShowView

number is found in most TV listings magazine.

1 Switch on the TV set. If required, select the programme number

for the DVD recorder.

2 Press TIMER s on the remote control.

The programming method selected last is marked.

3 Select 'ShowView system' using B or A and confirm with

C .

4 Enter the entire ShowView number. This number is up to 9 digits

long and can be found next to the start time of the TV programme

in your TV listings magazine.

e.g.: 5-312-4 or 5,312 4

Enter 53124 for the ShowView-number.

If you make a mistake, you can clear your instructions with

CLEAR .

Timer

ShowView system

ShowView number

---------

Mo-Fr/Weekly

Press SELECT

To store

Press OK

Selecting daily/weekly recordings

Using SELECT , select from the following options:

'Mo-Fr': Repeated daily recordings (Monday to Friday).

'Weekly': Repeated weekly recordings (every week on the same day).

5 Confirm with OK .

Programming a recording (TIMER)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips DVDR730 Seite 138

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips DVDR730

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info