Bedienungsanleitung Philips DVDR730 (Seite 142 von 158) (Deutsch, Englisch)

1071

142

Zoom out

Zoom in

Vorherige Seite

1/158

Nächste Seite

General

This section describes how you can make additional personal settings.

The symbols have the following meaning:

Picture settings

Sound settings

Language settings

Additional settings

Disc settings

Record settings

Installation

Preparation:

•) Switch on the TV set, and if necessary, select the programme

number for the DVD recorder.

•) Switch on the DVD recorder.

1 Press the SYSTEM MENU button on the remote control.

P The menu bar appears.

If this menubar is not complete visible on your wide screen TV-set,

change the picture settings on your TV.

2 Select '

' using D oder C and confirm with

3 Select the corresponding function using B or A and confirm

with C .

4 Select the corresponding line using B or A and confirm with

C . For more information on each function, read the following

pages.

5 Select the corresponding function using B or A , or the setting

with D or C . Select the functions you want to change as

described in the following pages.

6 Confirm the new setting with OK .

7 Close the menu item with D .

Picture settings

In this menu you can adapt the picture from the DVD-Recorder to

your TV set.

Additionally you can adjust the Colour, the Brightness, the Contrast,

for playback from the internal tuner or input sockets seperately You

can select the following functions in this menu:

Picture

TV shape 16:9

Horizontal video shift ï

P-scan vertical shift Adjust level…

EXT2 video input RGB + CVBS

EXT1 video output RGB + CVBS

Component video output Interlaced

'TV shape'

The picture signal from your DVD recorder can be set to match your

TV set:

O '4:3 letterbox'

for a widescreen picture with black bars at the top and

bottom

O '4:3 panscan'

for a full-height picture with the sides trimmed.

O '16:9'

for a widescreen TV set (16:9 screen ratio)

'Horizontal video shift'

Use this feature to adjust the position of the picture on your TV left or

right using D , C to suit the screen of your TV set.

'EXT1 video output', 'EXT2 video input'

Since RGB and S-VIDEO signals sometimes use the same connections

on a scart cable, the two signals cannot be transmitted simultaneously.

With these settings, you can decide whether RGB or S-VIDEO signals

are to be transmitted. This setting affects only the scart sockets of the

DVD recorder ('EXT1 video output': Output socket EXT1 TO

TV-I/O and 'EXT2 video input': Input socket EXT2 AUX-I/O )

Please also observe which signals are available at which scart socket of

the TV set or how the scart sockets need to be switched.

If necessary, consult the instruction manual of your TV set.

'EXT2 video input'

O 'RGB + CVBS'

Depending on the TV set you are using, switching between the

'RGB' and the 'Video(CVBS/FBAS)' signal is done automatically.

User preferences

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips DVDR730 Seite 142

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips DVDR730

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info