Bedienungsanleitung Philips DVDR730 (Seite 147 von 158) (Deutsch, Englisch)

1071

147

Zoom out

Zoom in

Vorherige Seite

1/158

Nächste Seite

Parental level control (DVD

video only)

Films on pre-recorded DVD discs may contain scenes not suitable for

children. Therefore, some discs may contain 'Parental Control' rating

information that applies to the entire disc or to certain scenes on the

disc.

The appropriate scenes have filter values that reach from 1-8. If such a

scene is detected during playback, the filter value set on the DVD

recorder is compared to the scene. If the filter value is higher than the

setting, an alternative scene will be played (if available).

Most DVDs apply the rating to an entire DVD. Therefore, if certain

scenes exceed the rating you select, the entire disc will be blocked

from viewing.

Activating/deactivating parental level control

Preparation:

•) Switch on the TV set, and if necessary, select the programme

number for the DVD recorder.

•) Switch on the DVD recorder.

1 Press the SYSTEM MENU button on the remote control.

P The menubar appears.

2 Select the '

' icon using D or C .

3 Press the SYSTEM MENU button on the remote control.

4 Select the '

' icon using D or C .

5 Select '

(Disc features)' using B or A and confirm with C .

Disc features

Access control Enter code…

Auto resume On

6 Confirm 'Access control' using C .

7 Enter a 4-digit code of your choice. If the code is new, you may

have to enter the code a second time as confirmation.

8 Select the 'Parental level' using A or B and confirm with C .

A bar appears to select the parental level.

9 Select the appropriate rating using B , A or the number buttons

0..9 .

What do the ratings mean?

Rating 0 (displayed as '--') parental control not active.

Rating 1 (suitable for children)

Rating 8 (only suitable for adults)

What happens if a DVD scene contains a higher level than

the rating set?

If the recorder does not find a suitable alternative, playback will stop

and you must enter the four-digit code.

0 Confirm with OK . Quit using D and SYSTEM MENU .

Changing the country

The set filter values depend on the respective country. It is therefore

necessary to enter the country to which these filter values apply.

Preparation:

•) Switch on the TV set, and if necessary, select the programme

number for the DVD recorder.

•) Switch on the DVD recorder.

1 Press the SYSTEM MENU button on the remote control.

P The menubar appears on the screen.

2 Select the '

' icon using D or C .

3 Select line '

(Disc features)' using B or A and confirm with

C .

Disc features

Access control Enter code…

Auto resume On

4 Confirm the line 'Access control' using C .

5 Enter your four-digit code. If the code is new, you may have to

enter the code a second time as confirmation.

6 Select 'Change country' using B or A and confirm with C .

7 Select the corresponding country using A or B and confirm

with OK .

8 To end, press D and then SYSTEM MENU .

ENGLISH

Access control (Child Lock)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips DVDR730 Seite 147

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips DVDR730

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info