1055
38
Zoom out
Zoom in
Vorherige Seite
1/120
Nächste Seite
28
9 Use a component video (Y Pb Pr) cable, connect the three cinch
sockets (red, blue, green) COMPONENT VIDEO OUT at the back
of the DVD recorder with the corresponding three component video
input sockets of your TV set, usually labelled 'Component Video
Input', 'YUV Input', 'YPbPr', 'YCbCr' or simply 'YUV'.
Warning!
Do not confuse these sockets with the five-component RGB sockets
(if available) or the yellow video (CVBS/FBAS) socket and the two
audio sockets (red/white). The five-component RGB sockets are only
provided for the R-G-B-H-V signals (red, green, blue with horizontal
and vertical synchronisation impulse).
Please observe the colour sequence
The colours of the sockets at the DVD recorder and the connectors must
match those of the socket colours at the TV set
(red-red/blue-blue/green-green). If they don't, the colours of the picture may
get mixed up or the picture may not be visible.
Tip
0 Use an audio (cinch) cable, connect the red/white cinch socket OUT
AUDIO L/R at the back of the DVD recorder with the mostly
red/white audio input socket of your TV set (usually labelled 'Audio in'
or 'AV in'. See the instruction manual of your TV set.)
A If necessary, switch your TV set to the component video input socket.
Also consult the instruction manual of your TV set.
B The menu of the DVD recorder should now appear on the TV
screen. If not, check the cable connections and the settings on your
TV set.
Manual TV channel search
In some cases, not all of the available TV channels may have been found and stored during initial
installation. In this case, you will need to search for and store the missing or coded TV channels
manually.
Manual search with EasyLink
With 'Easy Link', the DVD recorder will automatically download the TV
channels stored on the TV set. This is why some lines have no function. To
store new TV channels, they must first be stored on the TV set. The
information will then be transferred to the DVD recorder automatically.
Tip
1 Switch on the TV set. If required, select the programme number for
the DVD recorder.
2 Switch on the DVD recorder using STANDBY-ON m .
Installing your DVD recorder
38

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Philips DVDR80 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Philips DVDR80

Philips DVDR80 Bedienungsanleitung - Deutsch - 124 seiten

Philips DVDR80 Bedienungsanleitung - Holländisch - 126 seiten

Philips DVDR80 Bedienungsanleitung - Spanisch - 126 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info