Bedienungsanleitung Philips dvp 320 (Seite 12 von 31) (Englisch)

137580

Zoom out

Zoom in

Vorherige Seite

1/31

Nächste Seite

English

Slow Motion

DVD

1 To get a slow motion effect during playback, press

3 or 4.

2 Press 3 or 4 again, you can get different playback

forward/backward speeds.

3 Press PLAY to return to normal play back.

VCD

1 To get a slow motion effect during playback, press

2 Press 4 again, you can get different playback

forward speeds.

3 Press the PLAY key to return to normal play back.

NOTE:

- The SLOW BACKWARD function is not available

for Super VCD/VCD/CD discs.

Audio control during playback

MUTE

DVD

VCD

1 Press the MUTE key to disable the sound output.

2 Press the MUTE key again to deactivate mute.

Audio channel selection

VCD

1 Super VCD has two stereo audio channels which

are used for playing karaoke or the audio

language selection. ( for instance, you can choose

one channel for only the music background of the

song while you play the karaoke.)

2 Press the AUDIO key on the remote control to

select the audio channels you want.

3 VCD has only one stereo audio channel, you can

select STEREO, LEFT MONO, RIGHT MONO or

MIX-MONO by pressing the AUDIO key on the

remote control.

➜ STEREO: Output the left and right audio

channels of the disc through the left and right

audio sockets accordingly.

➜ LEFT MONO: Output the left audio channels

of the disc through the left and right audio

sockets.

➜ RIGHT MONO: Output the right audio

channels of the disc through the left and right

audio sockets.

➜ MIX-MONO: each of the audio sockets can

output the same audio effect as stereo.

Note: If you choose digital audio output and set

DIGITAL OUTPUT to ALL, you can not select LEFT

MONO and RIGHT MONO with the AUDIO key.

Operation

Basic Playback

1 Press POWER on the front panel to turn on the

DVD player.

2 Press OPEN/CLOSE on the top panel to open

the disc compartment.

3 Place the Disc on the Disc hub, with the label

facing up and then press the lid down.

➜ After recognizing the disc, the player will start

to playback automatically.

4 Wait for the Disc to stop spinning completely

before you reach to remove the Disc or touch

the Disc.

POWER ON/OFF

Notes:

– DVDs may have a region code. Your player will

not play discs that have a region code different

from the region code of your player.

– If ‘Disc Lock’ is set to LOCK and the disc

inserted is not authorized, the 6-digit code must be

entered and/or the disc must be authorized (see

‘Disc Lock’).

General Operation

Note: All instructions set out below refer to the

remote control, unless otherwise stated.

Video control during playback

STOP/PLAY

DVD

VCD

1 If you press the STOP key once, you can later

resume from the point at which you stopped by

pressing the PLAY key. The player will start from

the beginning of the disc if you pressed the STOP

key twice.

PAUSE/STEP

DVD

VCD

1 To get a still picture, press PAUSE key during

playback.

2 To step forward to the next frame picture, press

PAUSE key again.

3 To resume normal playback, press PLAY.

DVD

VCD

1 To search the contents in fast speed, press the 2

or 1 for fast forward/backward searching.

2 Press the 1 or

2 again to increase the speed for

searching.

3 Press PLAY to return to normal playback.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips dvp 320 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info