Bedienungsanleitung Philips DVP-620VR (Seite 2 von 20) (Englisch)

584558

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

The region code for this set is 2.

Since it is usual for DVD movies to be released

at different times in different regions of the

world, all players have region codes and discs

can have an optional region code. If you load a

disc of a different region code to your player,

you will see the region code notice on the

screen. The disc will not playback, and should be unloaded.

Manufactured under license from Dolby Laboratories. “Dolby”

and the double-D symbol are trademarks of Dolby Laboratories.

This product incorporates copyright protection technology

that is protected by method claims of certain U.S. patents and

other intellectual property rights owned by Macrovision

Corporation and other rights owners. Use of this copyright

protection technology must be authorised by Macrovision

Corporation, and is intended for home and other limited

viewing uses only unless otherwise authorised by Macrovision

Corporation. Reverse engineering or disassembly is prohibited.

English

General Information

Thank you for purchasing this Philips DVD/ VCR.This Owner’s

Manual explains the basic operation of this DVD/ VCR.

Environmental Information

All unnecessary packaging has been omitted.

Packaging has been made easy to separate into three materials:

cardboard (box), polystyrene foam (buffer) and polyethylene

(bags, protective foam sheet).

Your DVD/VCR consists of materials which can be recycled

and reused if disassembled by a specialised company. Please

observe the local regulations regarding the disposal of

packaging materials, exhausted batteries and old equipment.

Supplied Accessories

• Remote control •

Batteries (two AA size) for Remote control

• SCART cable • RF Coaxial cable • Owner’s Manual

Safety Information

• To reduce the risk of fire or electric shock, do not expose

this device to rain or moisture.

• Before operating the DVD/VCR, check that the operating

voltage indicated on the typeplate (or the voltage indication

beside the voltage selector) is identical with the voltage of

your local power supply. If not, please consult your dealer.

• Place the DVD/VCR on a flat, hard and stable surface.

• There must be sufficient room in front of the player for the

disc tray to be opened.

• In cabinet, allow about 2.5cm (1inch) of free space all around

the player for adequate ventilation.

• Do not expose your player to extreme of temperature or

humidity.

• If the DVD/VCR is brought directly from a cold to a warm

location, or is placed in a very damp room, moisture may

condense on the lens of the disc unit inside the DVD/VCR

player. Should this occur, the DVD/VCR would not operate

normally. Leave the player on for about one hour with no disc

in the DVD/VCR until normal playback is possible.

• The mechanical parts of the set contain self-lubricating

bearings and must not be oiled or lubricated.

• Never spill liquid of any kind on this unit. If liquid is spilled

into the unit, consult qualified service engineer.

• When the DVD/VCR is switched to Standby mode, it

is still consuming some power. To disconnect the

system from the power supply completely, remove

the AC power plug from the wall socket.

Introduction

This product complies with the requirements of Directive

73/23/EEC +89/336/EEC +93/68/EEC.

Laser safety

This unit employs a laser. Due to possible eye injury, only a

qualified service person should remove the cover or attempt

to service this device.

USE OF CONTROLS OR ADJUSTMENTS OR

OF PROCEDURES OTHER THAN THOSE

SPECIFIED HEREIN MAY RESULT IN HAZARDOUS

RADIATION EXPOSURE.

The DVD/ VCR is in conformity with the

EMC directive and low-voltage

directive.

For Customer Use:

So that you can identify your machine for service questions

or in the event of theft, enter the serial number here.The

serial number (PROD. NO.) is printed on the type plate

fixed at the back of the device.

Model No. DVP620VR

Serial No. ________________________________________

LASER

Type Semiconductor laser GaAlAs

Wave length 655 nm (DVD)

790 nm (VCD/CD)

Output Power 0.8 mW (DVD)

0.5 mW (VCD/CD)

(WARNING

LOCATION:

ON THE BACK-

PLATE OF SET)

CLASS 1 LASER PRODUCT

KLASSE 1 LASER PRODUKT

KLASS 1 LASER APPARAT

CLASSE 1 PRODUIT LASER

About the PBC Function of Video CD

• This unit conforms to ver.1.1 and ver.2.0 of VIDEO CD

standard, with PBC function.

Ver.1.1 (without PBC function):You can enjoy playback picture

as well as music CD.

Ver.2.0 (with PBC function):When using a VIDEO CD with

PBC function,“PBC” appears on

the display.

• “PBC” stands for Play Back Control.

• Video CD with PBC function has its original menu. Menu

operation may vary depending on the disc. Refer to the

manual included in the disc for details.

• “PBC” appears on the front panel display when a Video CD

with PBC function is loaded.

SHOWVIEW is a trademark of Gemstar Development

Corporation.

The S

HOWVIEW system is manufactured under licence from

Gemstar Development Corporation.

H9720ED.qx3 04.4.16 10:43 AM Page 2

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips DVP-620VR Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips DVP-620VR

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info