Bedienungsanleitung Philips DVT2110 (Seite 15 von 20) (Englisch)

706772

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

Use the Up/Down buttons to navigate to Format

storage and then press the Record button to conrm

your selection.

Select Delete.

X All data is deleted from the internal storage.

Reset settings

You can reset your menu settings to their default state—

the way they were when you rst purchased your device

and turned it on.

Caution

• Resetting your menu settings will delete all settings

you have made on your device. After a reset, you will

have to adjust all settings again.

Note

• Your data won’t be deleted and is still available after

resetting the menu settings.

To reset your settings:

In stop mode, press the Right function button to

open the settings panel.

Press the Record button to select All settings.

Press the Right function button to enter the Device

settings.

Use the Up/Down buttons to navigate to Reset

settings and then press the Record button to conrm

your selection.

Select Reset.

X All settings on your device are reset to their

default state.

Updating your device

Your device is controlled by an internal program called

rmware. As a part of ongoing product maintenance, the

rmware is upgraded and errors are corrected.

It is possible that a newer version (an ‘update’) of the

rmware has been released since you purchased the

device. In this case, you can easily update your device to

the latest version.

Caution

• Before you update the rmware, make sure that your

device has at least 30% battery power left. This helps

to prevent the power supply being interrupted during

the update.

• Don’t disconnect the USB cable from the device while

you are transferring les. This might cause data loss.

Note

• To nd out about new rmware versions, regularly

check the product website for your model at

www.voicetracer.com/help.

Update your VoiceTracer

Connect the device to the computer via the supplied USB

cable.

X A charging battery icon appears on the screen

and the Record/Status LED ashes orange for a

few seconds.

Download the rmware update le for your model

from the product website www.voicetracer.com/help.

Unzip the rmware update le you downloaded from

the product website.

Open Windows Explorer on a Windows computer, or

open Finder on a Mac computer.

Double-click the VoiceTracer drive.

X The content of your VoiceTracer is displayed in a

new window.

Copy the rmware update le to the root directory of the

device.

X During this process, the Record/Status LED

ashes orange. When the process is complete, the

Record/Status LED stops ashing.

Disconnect the device from the computer.

X The rmware is automatically updated.

X The Firmware update window is displayed.

When the update is complete, the device will

automatically switch o.

15Device and data management

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips DVT2110 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips DVT2110

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info