Bedienungsanleitung Philips DVT7500 (Seite 14 von 29) (Englisch)

654436

Zoom out

Zoom in

Vorherige Seite

1/29

Nächste Seite

14 Playback

Playback speed

Set your desired playback speed if you want to play

back your recording more slowly or faster.

In playback mode, press the Speed button on the

right side of your device.

Use the Volume up or Volume down button to set

your desired playback speed.

Press the Menu button to conrm your selection.

A-B replay mode

You can mark a sequence A-B in an existing recording to

replay only this marked section.

Mark an A-B sequence

In playback mode, press and hold the Menu button

until ‘A-B’ is displayed on the top of the screen.

X ‘A’ starts ickering.

Press the Fast forward button to mark the beginning

of the sequence (‘A’) to be replayed.

X ‘A’ stops ickering.

X ‘B’ starts ickering.

Press the Fast forward button again to mark the end

of the sequence (‘B’) to be replayed.

X ‘B’ stops ickering and the selected sequence is

replayed several times.

Stop A-B replay mode

If you want to stop the A-B replay mode, you can do one

of the following:

• Press the Menu button to stop the A-B replay mode

and continue with the normal playback.

• Press the Play/Pause button to pause the playback.

Press the Play/pause button again to continue with

the normal playback.

• Press the Stop button to stop playback.

Edit les

You can edit existing recordings in playback mode.

To switch between the editing options Append, Insert,

Divide, and Cut, press the Menu button to select your

desired editing option. The selected editing option is

displayed. It replaces the File details icon on the screen.

Note

• If you don’t operate your device for eight seconds

after selecting an editing option, the editing mode

is deactivated. Press the Menu button again to

reactivate the editing mode.

• In editing mode, you can’t pause playback because

the Play/Pause button is congured to conrm the

selection of an editing option.

Append: Add additional recording parts at the end of an

existing recording.

To append recording parts:

In playback mode, press the Menu button once to

select Append.

Press the Play/Pause button to conrm your

selection.

X A new recording starts at the end of your current

le.

Insert: Insert additional recording parts without

overwriting an existing recording.

To insert recording parts:

In playback mode, press the Menu button twice to

select Insert.

Press the Play/Pause button at the part of your

current recording where you want to insert an

additional recording part.

X A new recording starts at the selected part of the

existing recording.

Divide: Divide an existing recording into two les.

To divide a recording into two les:

In playback mode, press the Menu button three

times to select Divide.

Press the Play/Pause button at the part of your

current recording where you want your recording to

be split.

X The recording is divided into two les. Both les

are saved to the folder of the original recording.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips DVT7500 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info