Bedienungsanleitung Philips EP1223 (Seite 9 von 274) (Alle Sprachen)

776070

Zoom out

Zoom in

Vorherige Seite

1/274

Nächste Seite

1To assemble LatteGo, first insert the top of the milk container under the hook at the top of the

frame (Fig. 4). Then press home the bottom part of the milk container. You hear a click when it locks

into place (Fig. 5).

Note: Make sure that the milk container and the frame are clean before you connect them.

2Slightly tilt LatteGo and put it on the hot water spout (Fig. 6). Then press it home until it locks into

place (Fig. 7).

3Fill LatteGo with milk up to the level indicated on the milk container for the drink you are brewing

(Fig. 8). Do not fill the milk container beyond the maximum indication.

If you have personalized the milk quantity, you may need to fill the milk container with more or

less milk than indicated for this drink on LatteGo.

Always use milk coming directly from the fridge for optimal results.

4Place a cup on the drip tray.

5Tap the milk-based drink icon of your choice.

-You can now adjust the drink to your own preference (see 'Personalizing drinks').

6Press the start/stop button.

-The light in the drink icon flashes while the drink is being dispensed. When you brew a

cappuccino or latte macchiato, the machine first dispenses milk and then coffee. When you

brew caffè latte, the machine first dispenses coffee and then milk.

-To stop dispensing milk before the machine has dispensed the preset amount, press the

start/stop button.

7To stop dispensing the complete drink (milk and coffee) before the machine is finished, press and

hold the start/stop button.

Frothing milk with classic milk frother

Always use milk coming directly from the fridge for the best foam quality.

1Tilt the black silicone handle on the machine to the left and slide the milk frother onto it (Fig. 9).

2Fill a milk jug with with approx. 100 ml milk for cappuccino and approx. 150 ml milk for latte

macchiato.

3Insert the milk frother approx. 1 cm into the milk.

4Tap the steam icon (Fig. 10).

-The light in the steam icon goes on and the start light starts pulsing.

5Press the start/stop button to froth the milk (Fig. 11).

-The machine starts heating up, steam is forced into the milk and the milk is frothed.

6When the milk foam in the milk jug has reached the required volume, press the start/stop button

again to stop frothing milk.

Never froth milk longer than 90 seconds. The frothing automatically stops after 90 seconds.

You do not have to move the milk jug during milk frothing to get the best milk froth quality.

Brewing coffee with pre-ground coffee

You can choose to use pre-ground coffee instead of beans, for example if you prefer a different coffee

variety or decaffeinated coffee.

1Press the on/off button to switch on the machine and wait until it is ready for use.

2Open the lid of the pre-ground coffee compartment and pour one leveled measuring scoop of pre-

ground coffee into it (Fig. 12). Then close the lid.

English

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips EP1223 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info