Bedienungsanleitung Philips EP3241 (Seite 9 von 264) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

684440

Zoom out

Zoom in

Vorherige Seite

1/264

Nächste Seite

3 Place a cup under the coffee dispensing spout.

4 Select a single drink.

5 Press the aroma strength icon for 3 seconds (Fig. 13).

The pre-ground coffee light goes on and the start light starts pulsing.

6 Press the start/stop

button.

7 To stop dispensing coffee before the machine is finished, press the start/stop button again.

With pre-ground coffee you can only brew one coffee at a time.

Pre-ground coffee is not a setting that is saved as a previous selected strength setting. Each time

you want to use pre-ground coffee, you need to press the aroma strength icon for 3 seconds.

When you select pre-ground coffee, you cannot select a different aroma strength.

Dispensing hot water

1 If attached, remove LatteGo or the milk frother.

2 Tap the hot water icon (Fig. 14).

The drink quantity lights go on and show the previous selected drink setting for hot water.

3 Adjust the hot water quantity to your preference by tapping the drink quantity icon (Fig. 3).

4 Press the start/stop

button.

The light in the hot water icon flashes and hot water is dispensed from the hot water spout (Fig.

15).

5 To stop dispensing hot water before the machine is finished, press the start/stop

button again.

Adjusting machine settings

Programming the highest default setting of your drinks

The machine has 3 default settings for each drink: low, medium, high. You can only adjust the quantity

of the highest setting. The new quantity can be stored as soon as the start light starts to pulse.

Before you start programming the quantity of a milk drink, assemble LatteGo and pour milk in it.

1 To adjust the highest quantity setting, press and hold the icon of the drink you want to adjust for 3

seconds.

The upper light of the drinks quantity icon and the upper light of the milk quantity icon (specific

types only) starts to pulse and the start/stop

button starts to pulse, indicating that you are in

programming mode.

2 Press the start/stop button. The machine starts to brew the selected beverage.

The start light lights up continuously at first. When the machine is ready to store the adjusted

volume, the start/stop light starts to pulse.

3 Press the start/stop

button again when the cup contains the desired quantity of coffee or milk.

In case of cappuccino or latte macchiato, first the milk will be dispensed. Press the start/stop

button when the cup contains the desired milk quantity. The machine automatically starts

dispensing the coffee. Press the start/stop button again when the cup contains the desired

quantity.

After you have programmed the new highest default quantity for a drink, the machine will dispense

this new amount each time you select the highest quantity of this drink.

English

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips EP3241 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips EP3241

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info