Bedienungsanleitung Philips EP5361 (Seite 10 von 25) (Englisch)

672091

Zoom out

Zoom in

Vorherige Seite

1/25

Nächste Seite

Activating the AquaClean filter

You need to activate every new AquaClean filter that you use. By activating the AquaClean filter, the

machine monitors the capacity of the AquaClean filter and the number of filters used. There are 3

ways to activate the AquaClean filter.

1. Activating the AquaClean filter during first installation

After switching on for the first time, the machine guides you through the first installation steps such as

filling the water tank, filling the water circuit and activating the AquaClean filter. Simply follow the

instructions on the screen.

2. Activating the AquaClean filter when prompted

Note: Replace the AquaClean filter as soon as the capacity has dropped to 0% and the filter icon

flashes quickly. Replace the AquaClean filter at least every 3 months, even if the machine has not yet

indicated that replacement is required.

Tip: We advise you to buy a new filter when the capacity has dropped to 10% and the filter icon starts

flashing slowly. This ensures that you can replace the filter when the capacity has dropped to 0%.

1 Press the MENU button, scroll to AQUACLEAN FILTER and press the OK button to confirm.

The display asks if you want to activate a new filter (Fig. 5).

2 Press the OK button to confirm.

The display automatically updates the number of filters used (Fig. 6).

Note: If you want to replace the AquaClean filter after 8 filters have been used, you first need to

descale the machine. Follow the instructions on the display.

3. Activating the AquaClean filter at any other time

You can start (re)using the AquaClean filter at any time by following the instructions below.

1 Press the MENU button, select MENU and press the OK button to confirm. Scroll to AQUACLEAN

FILTER. Press the OK button to confirm.

The display shows the numbers of AquaClean filters that have been installed previously from 0

to 8 filters (Fig. 6).

2 Select ON on the display and press the OK button to confirm (Fig. 7).

The display automatically updates the number of filters used (Fig. 8).

Then the 'machine ready' screen appears with the AquaClean 100% icon to indicate that the

filter has been installed (Fig. 9).

3 Dispense 2 cups of hot water (0.5 l) to complete the activation. Discard this water.

Note: In some situations the machine will tell you that you need to descale the machine before you

can install and activate a new AquaClean filter. This is because your machine has to be completely

limescale-free before you start to use the AquaClean filter. Follow the instructions on the screen.

Measuring water hardness

Use the water hardness test strip supplied to set the water hardness. Press the MENU button, select

MENU and scroll to select WATER HARDNESS.

1 Immerse the water hardness test strip in tap water for 1 second. Then wait for 1 minute.

2 Check how many squares have turned red.

3 Select the appropriate water hardness setting and press the OK button to confirm.

Number of red squares:

English

Value to be set 1 2 3 4

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips EP5361 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips EP5361

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info