Bedienungsanleitung Philips ergoline d330 4 lg (Seite 37 von 88) (Englisch)

301427

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

ErgoLine D330/D340

Customer Engineer Manual

Page 2-17

All of the keys shown in Figures 2-2 and 2-4 are programmable. The downloadable

keys are shown in the non-shaded boxes. The function keys on the main terminal and

the DSS 1 keys are programmable on both levels. The numeric keys on the main

terminal are programmable on the second level only. The keys shown in the shaded

boxes (DSS 2 & DSS 3) are not downloadable in SSW 805 but are programmable on

both levels.

Facility Codes and Local Functions

To give the user full access to ISPBX and ErgoLine D330 and D340 facilities, it is

necessary to download facility codes. These facility codes are used for translation when a

function key has been programmed. Some codes need to be downloaded to allow

facilities to be presented in soft-key menus (for example, the automatic ring-back soft-key

is only presented when appropriate and when the automatic ring-back code has been

downloaded). It may also be required to download information to enable or disable certain

local ErgoLine terminal functions.

For the purposes of facility code and local function downloading, the same Operational

Maintenance commands are used as for function key downloading. This means that the

information to be downloaded is entered as if it were to be downloaded to function keys.

Information is downloaded to 'facility numbers' instead of 'function keys'. The facility

numbers have nothing to do with the actual keys and can be considered to be an 'address'

in the ErgoLine terminal memory. Facility codes are always downloaded to key level 0.

Table 2-3 provides a list of functions that can be downloaded and the Facility Number to

which the information is written in the ErgoLine terminal. Since the names used for

particular facility codes differ in various ISPBXs, their unique identity is given in the

column Result ID used when defining facility codes.

Local ErgoLine terminal functions are enabled or disabled by downloading a 0 or a 1. The

parameter name used in OM commands for the facility number is KEY.

Note: For a number of functions it is also necessary that the user has the correct

facility class marks assigned in the SOPHO-iS. If no facility class mark is assigned

the user cannot use the facility.

TABLE 2-3. FACILITY CODES AND ADDRESSES FOR FACILITY CODE DOWNLOADING

INFORMATION TO BE STORED

NUMBER/FACILITY CODE RESULT

Executive/secretary absence Executive/secretary absent

Executive/secretary present

Do-not-disturb Activate do-not-disturb

Cancel do-not-disturb

Automatic ring-back Activate automatic ring-back

cancel automatic ring-back

Follow-me Activate follow-me

Cancel follow-me

34 Prepare Prepare follow-me 28

35 Activate from dest Activate follow-me from

destination

36 Deactivate from dest Deactivate follow-me from

destination

37 Cancel

38 Auto answer 0 = No,

1 = Continuous

2 = 1hour

39 Microphone blocked enable 0 = No, 1 = Yes L

40 One keystroke set-up 0 = No, 1 = Yes L

41 Add-on Activate 3-party call 55

FUNCTION

DOWNLOADED

FACILITY

NUMBER

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips ergoline d330 4 lg Seite 37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips ergoline d330 4 lg

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info