ErgoLine D330/D340
Customer Engineer Manual
Page 2-21
M
ESSAGE
W
AITING
(
FUNCTION CODE
39)
Messages are sent by the exchange.
A key must be programmed on the set for Message Waiting LED.
The LED can be programmed for a type 0, 1, or 2 message, meaning
respectively : LED on, winking or flashing.
The kind of message programmed for the different types, is system
dependent.
G
ROUP
R
ING
Y
ES
/N
O
(S
OFT
R
ING
)(
FUNCTION CODE
45)
Default setting is
group ring on
(yes).
Local function code for group ring yes/no (facility number 42) may be
downloaded; the default setting is then overruled.
Extension user can not change the setting any more if downloading was
done with priority level 3.
C
ALL
W
AITING
I
NDICATION
Y
ES
/N
O
(
FUNCTION CODE
51)
Default setting is
call waiting indication off
(no).
Local function code for call waiting beep yes/no (facility number 44) may
be downloaded; the default setting is then overruled.
Extension user can not change the setting any more if downloading was
done with priority level 3.
Note
: When the switch facility class mark 34 is set, the switch delivers a call
waiting tone. When the switch facility class mark 35 is set, the switch will only
deliver a tone for call waiting from an operator. When facility class mark 34
is set and call waiting indication as also set locally, call waiting is signalled
by the switch and by the set.
A
UTO
A
NSWER
O
FF
/O
N
(
FUNCTION CODE
57)
Default setting is
auto answer voice off
.
Local function code for auto answer (facility number 38) may be down-
loaded; the default setting is then overruled.
Extension user can not change the setting any more if downloading was
done with priority level 3.
R
INGER
O
N
/O
FF
(
FUNCTION CODE
58)
Default setting is
ringer on
.
Locally programmed in toggle list and can be programmed under a key.
S
TATUS
M
ONITORING
O
N
/O
FF
(
FUNCTION CODE
59)
Default setting is
monitoring on
.
Locally programmed in toggle list and can be programmed under a key.
