Bedienungsanleitung Philips Faro M7701 (Seite 9 von 11) (Englisch)

664868

Zoom out

Zoom in

Vorherige Seite

1/11

Nächste Seite

Frequently asked questions

My handset displays [Searching] or

[Unavailable], or [Register your Handset],

what do I do?

• Make sure that the base station has power

supply.

• The handset is out of range. Move it closer to the

base station.

• The handset is not paired with the base. Register

the handset to the base station.

If I fail to pair (register) the additional

handsets to the base station, what do I do?

• Your base memory is full. Access

[Services] > [Unregister] to unregister the

unused handsets and try again.

• If registration fails, unplug the power adapter

from the base station and plug it back. Wait for

15 seconds, and then repeat the registration

procedure.

I have chosen a wrong country in Welcome

screen, what do I do?

Reset your phone settings to the original factory

settings (see the section on “Restore default

settings”).

I have chosen a wrong language which I

cannot read, what do I do?

1 Press

to go back to the standby screen.

2 Press to access the main menu screen.

3 The following options will appear on the screen:

[Phone setup] > [Language]

[Réglages] > [Langue]

[Telefon-Setup] > [Sprache]

[Cong. telef.] > [Lingua]

4 Select them to access the language options.

5 Select your own language.

The handset loses connection with the

base or the sound interrupts during a call.

• The handset is nearly out of range. Move it closer

to the base station.

• Check if the ECO mode is activated. Turn it o

to increase the handset range and enjoy the

optimal call conditions.

• Re-register the handset to the base station.

The handset on the charger does not

charge or the battery discharges too fast.

• Make sure the batteries are inserted correctly.

• Make sure the handset is placed properly on the

charger. If the docking tone is turned on, you

can hear the docking tone when you place the

handset on the charging cradle. The battery icon

animates when charging.

• The charging contacts are dirty. Disconnect the

power supply rst and clean the contacts with a

damp cloth.

• The battery is not fully recharged. Leave the

handset on the charging cradle for at least

8 hours or until the battery icon on the handset

stops scrolling and indicates full bar.

• The batteries are old or defective. Purchase and

replace with new rechargeable batteries with the

same specications.

Bad audio (crackles, echo, etc.)

• The handset is nearly out of range. Move it closer

to the base station.

• The phone receives interference from the nearby

electrical appliances. Move the base station

away from them.

• The phone is at a location with thick walls. Move

the base away from them.

• The phone receives interference from the DSL

(digital subscriber line) connection. Install a DSL

lter to prevent the noise. Contact your service

provider for the DSL lter.

The caller ID does not display.

• The service is not activated. Check with your

service provider.

• The caller’s information is withheld or

unavailable.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips Faro M7701 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips Faro M7701

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info