Bedienungsanleitung Philips Faxjet 355 (Seite 19 von 32) (Englisch)

44407

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

Write clearly and legibly. Only use pens with dark ink (black/

dark-blue, not yellow/orange/light green).

The following points are the most common causes of errors

when copying!

v Don’t copy ...

... wet pages or pages with corrections made with

correction fluid; dirty pages or pages with a glossy

or laminated surface

... pages written in faint pencil, crayon, chalk or art-

ist’s charcoal

... pages from newspapers (printer’s ink)

... stapled pages or pages held together with paper-

clips. Remove all staples and clips before send-

ing.

... creased or torn pages

... pages joined with sticky tape or glue, with adhe-

sive stickers such as “post-it

” notes, or pages

which are too thin or too thick

Documents smaller than A5 risk getting stuck in the

machine.

Copy

You can use your fax machine to make copies of an original.

Resolution f is set by default. In addition, you can also select

resolution F (see chapter Fax / Image quality).

1 Place your documents face to the front in the document

feeder. You can load up to twenty pages at once.

2 Select the desired resolution with FINE/PHOTO.

a To make only one copy of the original, briefly press

COPY. The copying process starts immediately.

b In order to make more than one copy press COPY

(for at least two seconds).

The display will show the actual number of copies. If you

want to change this figure enter the desired number with the

number keys (max. 99). Press COPY.

3 Choose whether to reduce or enlarge the document in size

when copying.

Your machine provides the following options:

ZOOM ENLARGE:150

ZOOM NORMAL:1:1

ZOOM REDUCE: 75

ZOOM REDUCE: 50

4 Select the desired option with u and confirm with

OK.

D The machine stores the first page of the document into

memory and starts copying. Automatic sorting is there-

fore not an option!

D To interrupt the copying process press STOP.

D In case of a paper jam, if the cartridge is empty or the

memory is full, the copying process will be interrupted

automatically.

D In case of a document jam, open the panel and carefully

remove the paper.

Scan

(only for fax machines with a PC interface)

1 Place your documents in the document feeder.

2 There are two ways you can call up the scan function:

a Click on the LinkFax-Pro symbol on the right lower edge

of your screen. Select in the menu the command “scan”.

b Open the graphics program into which you wish to scan.

Select as source the LinkFax-Pro scanner driver.

3 The LinkFax-Pro scan window will open.

4 You can create a preview by using “page view”. On this

preview, a section of the document can be selected which

is to be scanned. With preview, you can also try out the

effects of various adjustments (e.g. filter, etc.).

Copy—scan—print

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips Faxjet 355 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips Faxjet 355

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info