Bedienungsanleitung Philips Faxjet 365 (Seite 18 von 36) (Englisch)

44391

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

8 Press Y. The device transmits the fax message succes-

sively to all recipients.

Transmission to Multiple Recipients

Re-transmission Ijet 2

Modifying or printing settings

1 Press @ several times until TX FROM MEMORY

appears on the display.

2 Press Y twice.

3 Using u select from the following settings and con-

firm using Y:

PRINT CONFIG. Printout of the settings

CHANGE PARAM.? Changes to the time and tele-

phone number

CANCEL SETTING? Resetting the settings.

Sending fax later

If you would like to make use of the lower telephone tariffs

or if the recipient can be reached at some specific time on-

ly, you can send the fax at a later time – within 24 hours.

1 Insert the document.

2 Press @ several times until

DELAYED TX ap-

pears on the display.

3 Confirm using Y. The document is now read.

4 Enter the time, at which the document should be trans-

mitted, e.g. 14 00 for 2 pm. Confirm using Y.

5 Enter the desired number using the numeric keypad,

select a speed dialling or short dialling entry or a

number from the redial or caller list.

6 Press Y. The device goes into standby mode and trans-

mits the fax at the entered time.

Modifying or printing settings

1 Press @ several times until DELAYED TX ap-

pears on the display. Press Y thrice.

2 Change the time and confirm using Y.

3 Change the number and confirm using Y.

Fax Reception

Fax reception

Received faxes are printed out immediately. If no paper or

no ink cartridge is inserted, the device saves incoming fax

messages. The W-display flashes. If you insert paper or a

new ink cartridge, the saved messages are printed.

Message memory full

If the message memory is full, no additional messages can

be received. Follow the specifications in the technical data.

Polling faxes

Fax Polling

With the fax polling function, you can retrieve faxes that

lie ready in the dialled fax machine. You can also provide

documents on your machine to be polled by others.

Polling faxes directly

1 Press @ several times until POLLING RX ap-

pears on the display.

2 Confirm using Y.

3 Accept the displayed time using Y or enter the time at

which the document is to be polled.

4 Enter the desired number using the numeric keypad or

dial a saved entry.

5 Press Y.

Polling send of faxes

You can keep a document ready in your device, which can

be polled by others. You can continue to place calls and re-

ceive faxes.

1 Insert the document.

2 Press @ several times until

POLLING TX SET

appears on the display.

3 Press Y twice.

If your machine cannot reach a recipient, the fax

message is sent to the other recipients. After the ma-

chine has called all recipients, it once again dials the

numbers that previously could not be reached.

You can set, if the fax should be removed from the

memory if the transmission failed or not. (see Chap-

ter "Settings", Page 26)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips Faxjet 365 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips Faxjet 365

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info