Bedienungsanleitung Philips Faxjet 365 (Seite 28 von 36) (Englisch)

44391

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

Using additional telephones (Ea-

sylink)

Easylink

With the Easylink function you can control your device

with additional telephones. To use this function, addition-

al telephones must be set to the tone dialling mode (DT-

MF/MFV tones) (for this purpose see the operating man-

ual of your additional telephone).

Starting Fax Reception

If you pick up at an additional device and hear that you are

receiving a fax (whistling tone or silence), you can start the

fax reception by pressing ** on the additional tele-

phone.

Changing code

Easylink Code

1 Press @ several times until INSTALLATION

appears on the display.

2 Confirm using Y.

3 Press Y several times until

REMOTE START:ON ap-

pears on the display.

4 Confirm using Y.

5 Enter the new code for starting fax reception.

6 Confirm using Y.

7 You can exit with X.

Using an External Answering Machine

For the best operation, the answering machine must be

connected to the B socket of the device.

Answering machine pause duration

You can also change the pause duration for the fax ma-

chine.

1 Press @ several times until

INSTALLATION

appears on the display.

2 Confirm using Y.

3 Press Y several times until

SILENCE LAPSE: 6 ap-

pears on the display.

4 Using u select from the displayed values.

5 Confirm using Y.

6 You can exit with X.

Prerequisites for outgoing message

Answering machine records fax signals

Detecting call signal clock pulse

automatically

Not supported everywhere

(Function is not supported in all countries and

networks)

If several call numbers with different call signal clock puls-

es are assigned to a telephone line by your network opera-

tor, the fax machine can detect these automatically. This

functions only in the

PHONE/FAX or TAD/FAX operat-

ing modes.

1 Press @ several times until

INSTALLATION

appears on the display.

2 Confirm using Y.

3 Using / select

ENHANCED FEATUR..

4 Confirm using Y.

5 Press Y several times until

DISTINC.RING:OFF

appears on the display.

6 Using u select

CHANGE PATTERN.

7 Confirm using Y. AUTODETECT. RING appears on

the display.

8 Call the fax machine with the desired telephone

number (the desired call signal clock pulse), until

RING DETECTED appears on the display of the fax

machine.

9 You can exit with X.

Call signal clock pulse detection

Change the code only if it is absolutely necessary.

The code must begin with * or # .

You can switch this function off, if in step 3 you se-

lect

REMOTE START:OFF, confirm using Yand

exit using X.

Make sure that the pause duration set on the external

answering machine is longer than the one on the fax

machine. Otherwise the answering machine auto-

matically picks up each call including faxes.

The outgoing message must be shorter than ten sec-

onds. Avoid music in your announcement. If the ex-

ternal answering machine has a “conserving func-

tion” (i.e. a function that changes the number of

rings as soon as new messages have been recorded),

switch it off.

If the external answering machine records fax signals,

but your device cannot receive faxes, inspect the con-

nection of the external answering machine

If the call signal clock pulse is not detected by the fax

machine,

RING NOT DETECT.appears on the dis-

play. Press X and repeat the process.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips Faxjet 365 Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips Faxjet 365

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info