Bedienungsanleitung Philips faxjet 525 primo (Seite 34 von 44) (Englisch)

424294

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

34 Philips · IPF 520 · 525 · 555

Switch on the Flash Function for

the Extension

For older telephone systems, the outside line access code

can be R (= FLASH). Only in this setting can a connection

to the public telephone network be made. With the flash

function switched on, a flash signal is triggered with the R

key.

1 Press MENU.

RECEPT. SET-UP appears on the

display.

2 Select using [

INSTALLATION.

3 Confirm with o.

STATION NAME appears on the

display.

4 Select using [

TEL.LINE SETUP.

5 Confirm with o.

LINE TYPE appears on the display.

6 Select using [

PBX FLASH.

7 Confirm with o.

8 Using [ select whether by pressing the R key, a flash

signal should be triggered or not.

9 Confirm with o.

Connecting Additional

Devices

Additional Devices

You can operate additional devices on a telephone line,

such as cordless telephones, answering machines, modems

or charge counters.

Connection to the Device

You can connect additional devices directly to your device.

1 Insert the telephone cable of the additional device into

the EXT socket (RJ-11-connection) at the bottom of

the device.

Connection to the Telephone Line

Order of Connections

In order for the fax switch to function, the device must be

first in the series if multiple devices are connected to the

same telephone socket. Follow the correct order.

Connection to the Fi rst Telephone Socket

Using Additional Telephones

(Easylink)

Easylink

With the Easylink function you can control your device

with additional telephones. To use this function, addi-

tional telephones must be set to the tone dialling mode

(DTMF/MFV tones) (for this purpose see the operating

manual of your additional telephone).

Starting Fax Reception

If you pick up at an additional device and hear that you are

receiving a fax (whistling tone or silence), you can start the

fax reception by pressing ** on the additional tele-

phone.

Changing Code

Changing Easylink Codes!

1 Press MENU. RECEPT. SET-UP appears on the

display.

2 Select using [

INSTALLATION.

3 Confirm with o.

STATION NAME appears on the

display.

4 Select using [

TEL.LINE SETUP.

5 Confirm with o.

LINE TYPE appears on the display.

6 Using [ select

REMOTE CONTROL.

7 Confirm with o.

8 Using [ select

YES.

9 Confirm with o.

10 Enter the new code for starting fax reception.

11 Confirm with o.

12 You can exit with j.

Notice

Outside Line Access Code is Automati-

cally Dialled

Store telephone numbers in the telephone book

at the beginning using R to automatically estab-

lish a connection to the public telephone net-

work. By pressing the R key, E appears on the

display.

Notice

Connection to the First Telephone

Socket

If you have multiple telephone sockets for the

same telephone line, the device must be con-

nected to the first telephone socket.

CAUTION!

Changing Easylink Codes!

Change the code only if it is absolutely neces-

sary. The code must begin with * or # .

Notice

Switching Off Function

You can switch this function off, if in step 8 you

select

NO, confirm using oand exit using j.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips faxjet 525 primo Seite 34

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips faxjet 525 primo

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info