Bedienungsanleitung Philips fc 8406 city line monte carlo (Seite 6 von 64) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

316579

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

6 ENGLISH

Important

◗ Only use Philips s-bag™ double-layer paper dustbags (FC8021).

◗ Never use the vacuum cleaner to suck up water or any other liquid. Never suck up ashes

until they are cold.

◗ When the vacuum cleaner is used to suck up fine dust, the pores of the dustbag may become

clogged, causing the passage of air through the dustbag to become obstructed.As a result,the

dustbag-full indicator will indicate that the dustbag needs to be replaced,even though the

dustbag is not full at all.

◗ Never use the appliance without the Motor Protection Filter.This could damage the motor

and shorten the life of the appliance.

◗ Never clean the appliance with water.

Connecting accessories

◗ To connect the hose to the appliance, push it into the appliance and turn it clockwise (fig. 1).

To disconnect the hose from the appliance, turn it anticlockwise and pull it out of the appliance.

Button coupling (specific types only)

1 Connect the tube to the handgrip by pressing the spring-loaded lock button on the handgrip

and inserting the handgrip into the tube.Fit the spring-loaded lock button into the opening in

the tube ("click") (fig. 2).

◗ To disconnect the tube from the handgrip, press the spring-loaded lock button and pull the

handgrip out of the tube.

◗ Use the same method to connect and disconnect the other accessories.

Telescopic tube

◗ Adjust the tube to the length you find most comfortable during vacuum cleaning (fig.3).

Reach & Clean nozzle

◗ The Reach & Clean nozzle can be used on either carpets or hard floors.The nozzle can be

turned 360 degrees to 4 different positions, allowing you to also vacuum clean hard-to-reach

places in an easy way.When the nozzle is positioned lengthwise, the suction power is

concentrated at the front side of the nozzle (fig.4).

◗ To adjust the nozzle to the type of floor and the area to be cleaned,put your foot on the

indicated spot and then turn the tube until the nozzle is in the required position (fig. 5).

1 With the nozzle positioned breadthwise and the brush strip folded out, you can clean large

hard floor areas.Turn the tube until the brush strip pops out of the nozzle housing and the

nozzle is positioned breadthwise (fig.6).

2 With the nozzle positioned lengthwise and the brush strip folded out, you can vacuum clean

small hard floor areas.Turn the tube 90 degrees anti-clockwise until it is positioned

lengthwise with the brush strip still folded out of the nozzle housing (fig. 7).

3 With the nozzle positioned breadthwise and the brush strip folded in, you can vacuum clean

large soft floor areas.Turn the tube 90 degrees anti-clockwise again to position the nozzle

breadthwise and to make the brush strip disappear into the nozzle housing (fig. 8).

4 With the nozzle positioned lengthwise and the brush strip folded in, you can vacuum clean

small soft floor areas.Turn the tube 90 degrees anti-clockwise again until it is positioned

lengthwise with the brush strip still folded in (fig. 9).

Crevice nozzle,brush nozzle and small nozzle

The crevice nozzle can be used either for cleaning narrow corners or hard-to-reach places.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips fc 8406 city line monte carlo Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info