Motor Protection Filter
Replace the Motor Protection Filter once a year.
1 Openthecoverandremovethelter.
2 Insertanewlterintotheholderwiththewhitesidepointingupwards(Fig.15).
Replace the AFS Micro Filter every 6 months.
1 Openthegrille(1)atthebackoftheapplianceandremoveit(2)(Fig.16).
2 Removetheoldlter.Placethesidesandthebottomedgeofthenewlterproperlybehind
the 3 ridges of the holder on the inside of the grille (Fig. 17).
3 Reattachthegrilletothevacuumcleaner.Firsthookthebottomedgeofthegrilleintothe
appliance(1)andthenpushthegrilletowardstheapplianceuntilitsnapshome(2)(Fig.18).
Two AFS Micro Filters and one Motor Protection Filter are available under type number FC8032.
Environment
Do not throw away the appliance with the normal household waste at the end of its life, but
hand it in at an ofcial collection point for recycling. By doing this, you help to preserve the
environment (Fig. 19).
If you need information or if you have a problem, please visit the Philips website at www.philips.com
or contact the Philips Customer Care Centre in your country (you nd its phone number in the
worldwide guarantee leaet). If there is no Customer Care Centre in your country, go to your local
Philips dealer or contact the Service Department of Philips Domestic appliances and Personal Care BV.
1 The suction power is insufcient.
Make sure the suction power knob is in maximum position (specic types only).
Make sure the slide on the handgrip is closed.
Perhaps the dustbag is full. Replace the dustbag.
Perhaps the lters are dirty. Replace the lters.
The nozzle, tube or hose may be blocked up. To remove the obstruction, disconnect the
blocked-up item and connect it (as far as possible) the other way around. Switch on the vacuum
cleaner to force the air through the blocked-up item in opposite direction (Fig. 20).
-
-
-
-
-
-
ENGLISH8
