Bedienungsanleitung Philips FC8972 Robot - SmartPro Compact (Seite 12 von 130) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

673186

Zoom out

Zoom in

Vorherige Seite

1/130

Nächste Seite

3 Use a brush with soft bristles (e.g. a toothbrush) to remove dust or fluff from the front wheel and

side wheels (Fig. 40).

4 To clean the side brushes, grab them by the bristles and pull them off their shafts (Fig. 41).

5 Remove fluff, hairs and threads from the shaft and from the side brush with a soft brush (e.g. a

toothbrush) or a cloth (Fig. 42).

6 Check the side brushes and the bottom of the robot for any sharp objects that could damage your

floor.

7 After you have removed the side brushes from their shafts, undo the snap connections of the

TriActive XL nozzle by inserting your fingers at the places marked with arrows and pull the TriActive

nozzle off the robot (Fig. 43).

8 Clean the suction opening with a soft brush (e.g. a toothbrush) (Fig. 44).

9 Remove all visible dirt from the TriActive nozzle (Fig. 45).

10 Insert the snap hooks of the TriActive nozzle into the holes in the bottom of the robot (Fig. 46).

Push the TriActive nozzle back into position. Check if the nozzle can move a few millimeters up and

down freely.

Replacement

Ordering accessories

To buy accessories or spare parts, visit www.shop.philips.com/service or go to your Philips dealer.

You can also contact the Philips Consumer Care Center in your country (see the international warranty

leaflet for contact details).

Replacing the filter

Replace the filter if it is very dirty or damaged. You can order a new filter under order number FC8012.

See 'Emptying and cleaning the dust container' in chapter 'Cleaning and maintenance' for instructions

on how to remove the filter from the dust container and how to place it in the dust container.

Replacing the side brushes

Replace the side brushes after some time to ensure proper cleaning results.

Note: Always replace the side brushes when you notice signs of wear or damage. We also recommend

that you replace both side brushes at the same time. You can order spare side brushes as a set under

order number FC8013.

1 To replace the side brushes, grab the old side brushes by the bristles and pull them off their shafts

(Fig. 41).

2 Push the new side brushes onto the shafts (Fig. 10).

Replacing the rechargeable battery

The rechargeable battery of the robot may only be replaced by qualified service engineers. Take the

robot to an authorized Philips service center to have the battery replaced when you can no longer

recharge it or when it runs out of power quickly. You can find the contact details of the Philips

Consumer Care Center in your country in the international warranty leaflet or go to

www.philips.com/support.

English

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Philips FC8972 Robot - SmartPro Compact Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Philips FC8972 Robot - SmartPro Compact

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info